RFC 374

Network Working Group                           Alex McKenzie
RFC #374                                        BBN
NIC 11099                                       19 July 1972

There are two significant developments in the operation of the network
which should be of interest to all sites:

NEW IMP SYSTEM IS RELEASED !
   On Tuesday July 18, the new IMP software described in previous RFC's
   (#331,#343,#359) was apparently successfully released.  We ran from
   10:00am on that day until Wednesday afternoon with very few network
   problems attributable to the new system.  We are quite pleased with
   this performance, and expect to leave the new system up permanently!!

   We are, of course, aware that in any system of this size, bugs may
   crop up at any time, and we solicit the help of the network community
   in finding them.  We also believe that the new system may have a
   different "feel" to users, both terminal users and Hosts.  We urge
   everyone to have a bit of patience while getting used to any change in
   the "feel" of the network.  On the other hand, PLEASE REPORT ANY
   SUSPECTED NETWORK MALFUNCTION TO THE NCC AS SOON AS POSSIBLE.
   Evidence of bugs, guesses as to what went wrong, etc., are always
   useful in hunting bugs, but don't let the lack of positive proof delay
   the reporting of suspected system malfunction.  The NCC telephone
   number is (617) 661-0100.  Feel free to call collect!

   The one known shortcoming of the new software is the exacerbation of a
   long-standing TIP software problem.  The TIP now often appears to
   neglect sending an Allocate control message for some active
   connection, with the effect that the Server-to-User path becomes
   blocked.  We are giving the solution of this problem the highest
   priority!  (Our current data seems to indicate that this problem is
   most likely to occur when there are several users and when the Server
   Host is a TENEX system.  If you know of other situations where this
   problem has occurred, please let us know!)

   Now that the new system is up, all sites with Model 516 IMPs will be
   contacted by telephone and asked to reset the switches on their IMPs
   as follows:

             HALT INH         - on
             W.D.T.           - on
             AUTO RSTRT       - on
             MEMORY PRTCT     - on

                                                                [Page 1]

SITE POWER PROBLEMS
   The network has recently been experiencing serious difficulties
   related to the annual problem of more demand for electricity than is
   available during the summer months.  For example:

       During the month of June, between 1/4 and 1/2 of the
       IMP down time was due to site power failure.

       During the weekend of July 15-16, two sites were down
       all weekend due to air-conditioning failure which was
       apparently related to power failures or brownouts.
       This left several sites connected to the rest of the
       net through only one path which, according to Murphy's
       law, eventually failed - leaving nine sites partitioned
       from the remainder.

       On July 18, an underground power transformer supplying
       power to the entire computer room at site 27 failed,
       putting IMP 27 out of action for several hours (anddit
       could easily have been several weeks.)

   Obviously in these cases there is little that either the NCC or the
   site can do to restore service.  We expect these situations to
   continue or even get worse as the summer continues.  Please try to
   restrain your annoyance when these situations arise; we don't like
   them either!

       [ This RFC was put into machine readable form for entry ]
       [ into the online RFC archives by BBN Corp. under the   ]
       [ direction of Alex McKenzie.                      1/97 ]

                                                                [Page 2]