<- RFC Index (7601..7700)
RFC 7697
Internet Engineering Task Force (IETF) P. Pan
Request for Comments: 7697 Infinera
Category: Standards Track S. Aldrin
ISSN: 2070-1721 Google, Inc.
M. Venkatesan
Dell, Inc.
K. Sampath
Redeem
T. Nadeau
Brocade
S. Boutros
VMware, Inc.
January 2016
MPLS Transport Profile (MPLS-TP) Operations, Administration, and
Maintenance (OAM) Identifiers Management Information Base (MIB)
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects to configure the
Operations, Administration, and Maintenance (OAM) identifiers for
Multiprotocol Label Switching (MPLS) and the MPLS-based Transport
Profile (TP).
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7697.
Aldrin, et al. Standards Track [Page 1]
RFC 7697 MPLS-TP OAM ID MIB January 2016
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Overview ........................................................3
3.1. Conventions Used in This Document ..........................3
3.2. Terminology ................................................4
3.3. Acronyms ...................................................4
4. Feature List ....................................................5
5. Brief Description of MIB Objects ................................5
5.1. mplsOamIdMegTable ..........................................5
5.2. mplsOamIdMeTable ...........................................5
6. MPLS OAM Identifier Configuration for MPLS LSP: Example .........6
7. MPLS OAM Identifiers MIB Definitions ............................8
8. Security Considerations ........................................31
9. IANA Considerations ............................................32
9.1. IANA Considerations for MPLS-OAM-ID-STD-MIB ...............32
10. References ....................................................32
10.1. Normative References .....................................32
10.2. Informative References ...................................34
Acknowledgments ...................................................35
Authors' Addresses ................................................36
Aldrin, et al. Standards Track [Page 2]
RFC 7697 MPLS-TP OAM ID MIB January 2016
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects for modeling a Transport
Profile (TP) based on Multiprotocol Label Switching (MPLS) [RFC3031].
This MIB module should be used for performing the OAM (Operations,
Administration, and Maintenance) operations for MPLS Tunnel LSPs
(Label Switched Paths), Pseudowires, and Sections.
At the time of this writing, SNMP SET is no longer recommended as a
way to configure MPLS networks as was described in [RFC3812].
However, since the MIB modules specified in this document are
intended to work in parallel with the MIB modules for MPLS specified
in [RFC3812], certain objects defined here are specified with a
MAX-ACCESS of read-write or read-create so that specifications of the
base tables in [RFC3812] and the new MIB modules in this document are
consistent. Although the example described in Section 6 specifies
means to configure OAM identifiers for MPLS-TP Tunnels, this should
be seen as indicating how the MIB values would be returned in the
specified circumstances having been configured by alternative means.
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
3. Overview
3.1. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
RFC 2119 [RFC2119].
Aldrin, et al. Standards Track [Page 3]
RFC 7697 MPLS-TP OAM ID MIB January 2016
3.2. Terminology
This document uses terminology from the Multiprotocol Label Switching
Architecture [RFC3031], the MPLS Traffic Engineering (TE) MIB
[RFC3812], the MPLS Label Switching Router (LSR) MIB [RFC3813], the
OAM Framework for MPLS-Based Transport Networks [RFC6371], "MPLS
Transport Profile (MPLS-TP) Identifiers" [RFC6370], MPLS-TP
Identifiers Following ITU-T Conventions [RFC6923], and OAM in MPLS
Transport Networks [RFC5860].
3.3. Acronyms
BFD: Bidirectional Forwarding Detection
ICC: ITU Carrier Code
IP: Internet Protocol
LSP: Label Switched Path
LSR: Label Switching Router
ME: Maintenance Entity
MEG: Maintenance Entity Group
MEP: Maintenance Entity Group End Point
MIB: Management Information Base
MIP: Maintenance Entity Group Intermediate Point
MP: Maintenance Point
MPLS: Multiprotocol Label Switching
MPLS-TP: MPLS Transport Profile
PW: Pseudowire
TE: Traffic Engineering
TP: Transport Profile
Aldrin, et al. Standards Track [Page 4]
RFC 7697 MPLS-TP OAM ID MIB January 2016
4. Feature List
The MPLS transport profile OAM identifiers MIB module is designed to
satisfy the following requirements and constraints:
- The MIB module supports configuration of OAM identifiers for MPLS
point-to-point Tunnels, point-to-multipoint LSPs, co-routed
bidirectional LSPs, associated bidirectional LSPs, and
Pseudowires.
5. Brief Description of MIB Objects
The objects described in this section support the functionality
described in [RFC5654] and [RFC6370]. The tables support both
IP-compatible and ICC-based OAM identifiers configurations for MPLS
Tunnels, LSPs, and Pseudowires.
5.1. mplsOamIdMegTable
The mplsOamIdMegTable is used to manage one or more Maintenance
Entities (MEs) that belong to the same transport path.
When a new entry is created with mplsOamIdMegOperatorType set to
ipCompatible (1), then as per [RFC6370] (MEG_ID for an LSP is LSP_ID,
and MEG_ID for a PW is PW_Path_ID), MEP_ID can be automatically
formed.
For an ICC-based transport path, the user is expected to configure
the ICC identifier explicitly in this table for MPLS Tunnels, LSPs,
and Pseudowires.
5.2. mplsOamIdMeTable
The mplsOamIdMeTable defines a relationship between two points
(source and sink) of a transport path to which maintenance and
monitoring operations apply. The two points that define an ME are
called Maintenance Entity Group End Points (MEPs).
In between MEPs, there are zero or more intermediate points, called
Maintenance Entity Group Intermediate Points (MIPs). MEPs and MIPs
are associated with the MEG and can be shared by more than one ME in
a MEG.
Aldrin, et al. Standards Track [Page 5]
RFC 7697 MPLS-TP OAM ID MIB January 2016
6. MPLS OAM Identifier Configuration for MPLS LSP: Example
In this section, we provide an example of the OAM identifier
configuration for an MPLS co-routed bidirectional LSP.
This example provides usage of MEG and ME tables for management and
monitoring operations of an MPLS LSP.
This example considers the OAM identifiers configuration on a
head-end LSR to manage and monitor an MPLS LSP. Only relevant
objects that are applicable for IP-based OAM identifiers of MPLS
co-routed bidirectional LSPs are illustrated here.
In the mplsOamIdMegTable:
{
-- MEG index (Index to the table)
mplsOamIdMegIndex = 1,
mplsOamIdMegName = "MEG1",
mplsOamIdMegOperatorType = ipCompatible (1),
mplsOamIdMegServicePointerType = lsp (1),
mplsOamIdMegMpLocation = perNode (1),
-- Mandatory parameters needed to activate the row go here
mplsOamIdMegRowStatus = createAndGo (4),
mplsOamIdMegPathFlow
= coRoutedBidirectionalPointToPoint (2)
}
This will create an entry in the mplsOamIdMegTable to manage and
monitor the MPLS Tunnel.
Aldrin, et al. Standards Track [Page 6]
RFC 7697 MPLS-TP OAM ID MIB January 2016
The following ME table is used to associate the path information
to a MEG.
In the mplsOamIdMeTable:
{
-- ME index (Index to the table)
mplsOamIdMeIndex = 1,
-- MP index (Index to the table)
mplsOamIdMeMpIndex = 1,
mplsOamIdMeName = "ME1",
mplsOamIdMeMpIfIndex = 0,
-- The source MEP ID is derived from the IP-compatible MPLS LSP
mplsOamIdMeSourceMepIndex = 0,
-- The sink MEP ID is derived from the IP-compatible MPLS LSP
mplsOamIdMeSinkMepIndex = 0,
mplsOamIdMeMpType = mep (1),
mplsOamIdMeMepDirection = down (2),
-- RowPointer MUST point to the first accessible column of an
-- MPLS LSP
mplsOamIdMeServicePointer = mplsTunnelName.1.1.10.20,
-- Mandatory parameters needed to activate the row go here
mplsOamIdMeRowStatus = createAndGo (4)
}
Aldrin, et al. Standards Track [Page 7]
RFC 7697 MPLS-TP OAM ID MIB January 2016
7. MPLS OAM Identifiers MIB Definitions
MPLS-OAM-ID-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32
FROM SNMPv2-SMI -- RFC 2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
RowStatus, RowPointer, StorageType
FROM SNMPv2-TC -- RFC 2579
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
IndexIntegerNextFree
FROM DIFFSERV-MIB -- RFC 3289
mplsStdMIB
FROM MPLS-TC-STD-MIB -- RFC 3811
InterfaceIndexOrZero, ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
FROM IF-MIB; -- RFC 2863
mplsOamIdStdMIB MODULE-IDENTITY
LAST-UPDATED
"201601070000Z" -- January 07, 2016
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"Sam Aldrin
Google, Inc.
1600 Amphitheatre Parkway
Mountain View, CA 94043
USA
Email: aldrin.ietf@gmail.com
Thomas D. Nadeau
Email: tnadeau@lucidvision.com
Venkatesan Mahalingam
Dell, Inc.
5450 Great America Parkway
Santa Clara, CA 95054
USA
Email: venkat.mahalingams@gmail.com
Aldrin, et al. Standards Track [Page 8]
RFC 7697 MPLS-TP OAM ID MIB January 2016
Kannan KV Sampath
Redeem
India
Email: kannankvs@gmail.com
Ping Pan
Infinera
Sami Boutros
VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
USA
Email: sboutros@vmware.com"
DESCRIPTION
"Copyright (c) 2016 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This MIB module contains generic object definitions for
MPLS OAM identifiers."
-- Revision history
REVISION
"201601070000Z" -- January 07, 2016
DESCRIPTION
"MPLS OAM Identifiers MIB objects for Tunnels, LSPs,
Pseudowires, and Sections."
::= { mplsStdMIB 21 }
-- Top-level components of this MIB module
-- notifications
mplsOamIdNotifications
OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 0 }
-- tables, scalars
mplsOamIdObjects OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 1 }
Aldrin, et al. Standards Track [Page 9]
RFC 7697 MPLS-TP OAM ID MIB January 2016
-- conformance
mplsOamIdConformance
OBJECT IDENTIFIER ::= { mplsOamIdStdMIB 2 }
-- Start of MPLS Transport Profile MEG table
mplsOamIdMegIndexNext OBJECT-TYPE
SYNTAX IndexIntegerNextFree (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
mplsOamIdMegIndex, or a zero to indicate
that none exist. Negative values are not allowed,
as they do not correspond to valid values of
mplsOamIdMegIndex."
::= { mplsOamIdObjects 1 }
mplsOamIdMegTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsOamIdMegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Maintenance
Entity Groups (MEGs).
A MEG, as mentioned in the MPLS-TP OAM framework, defines
a set of one or more Maintenance Entities (MEs).
MEs define a relationship between any two points of a
transport path in an OAM domain to which maintenance and
monitoring operations apply."
::= { mplsOamIdObjects 2 }
mplsOamIdMegEntry OBJECT-TYPE
SYNTAX MplsOamIdMegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an MPLS-TP MEG.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS-TP OAM
framework.
When a new entry is created with
mplsOamIdMegOperatorType set to ipCompatible (1),
then as per RFC 6370 (MEG_ID for an LSP is LSP_ID, and
MEG_ID for a PW is PW_Path_ID), MEP_ID can be
automatically formed.
Aldrin, et al. Standards Track [Page 10]
RFC 7697 MPLS-TP OAM ID MIB January 2016
For a co-routed bidirectional LSP, MEG_ID is
A1-{Global_ID::Node_ID::Tunnel_Num}::Z9-{Global_ID::
Node_ID::Tunnel_Num}::LSP_Num.
For an associated bidirectional LSP, MEG_ID is
A1-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}::
Z9-{Global_ID::Node_ID::Tunnel_Num::LSP_Num}.
For an LSP, MEP_ID is formed using
Global_ID::Node_ID::Tunnel_Num::LSP_Num.
For a PW, MEG_ID is formed using AGI::
A1-{Global_ID::Node_ID::AC_ID}::
Z9-{Global_ID::Node_ID::AC_ID}.
For a PW, MEP_ID is formed using
AGI::Global_ID::Node_ID::AC_ID.
MEP_ID is retrieved from the mplsOamIdMegServicePointer
object based on the mplsOamIdMegServicePointerType value.
The ICC MEG_ID for an LSP and a PW is formed using the
objects mplsOamIdMegIdIcc and mplsOamIdMegIdUmc.
MEP_ID can be formed using MEG_ID::MEP_Index."
REFERENCE
"1. RFC 5860: Requirements for Operations, Administration,
and Maintenance (OAM) in MPLS Transport Networks,
May 2010.
2. RFC 6371: Operations, Administration, and Maintenance
Framework for MPLS-Based Transport Networks,
September 2011, Section 3.
3. RFC 6370: MPLS Transport Profile (MPLS-TP) Identifiers,
September 2011.
4. RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
Following ITU-T Conventions, May 2013."
INDEX { mplsOamIdMegIndex }
::= { mplsOamIdMegTable 1 }
Aldrin, et al. Standards Track [Page 11]
RFC 7697 MPLS-TP OAM ID MIB January 2016
MplsOamIdMegEntry ::= SEQUENCE {
mplsOamIdMegIndex Unsigned32,
mplsOamIdMegName SnmpAdminString,
mplsOamIdMegOperatorType INTEGER,
mplsOamIdMegIdCc SnmpAdminString,
mplsOamIdMegIdIcc SnmpAdminString,
mplsOamIdMegIdUmc SnmpAdminString,
mplsOamIdMegServicePointerType INTEGER,
mplsOamIdMegMpLocation INTEGER,
mplsOamIdMegPathFlow INTEGER,
mplsOamIdMegOperStatus INTEGER,
mplsOamIdMegSubOperStatus BITS,
mplsOamIdMegRowStatus RowStatus,
mplsOamIdMegStorageType StorageType
}
mplsOamIdMegIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the conceptual row identifying a MEG within
this MEG table. Managers should obtain new values for row
creation in this table by reading mplsOamIdMegIndexNext."
::= { mplsOamIdMegEntry 1 }
mplsOamIdMegName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each MEG has a unique name amongst all those used or
available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each MEG."
::= { mplsOamIdMegEntry 2 }
Aldrin, et al. Standards Track [Page 12]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMegOperatorType OBJECT-TYPE
SYNTAX INTEGER {
ipCompatible (1),
iccBased (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the operator type for the MEG. Conceptual rows
having 'iccBased' as the operator type MUST have valid
values for the objects mplsOamIdMegIdIcc and
mplsOamIdMegIdUmc when the row status is active."
REFERENCE
"1. RFC 6370: MPLS Transport Profile (MPLS-TP) Identifiers,
September 2011.
2. RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
Following ITU-T Conventions, May 2013, Section 3.1."
DEFVAL { ipCompatible }
::= { mplsOamIdMegEntry 3 }
mplsOamIdMegIdCc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Global uniqueness is assured by concatenating the ICC
with a Country Code (CC). The Country Code (alpha-2)
is a string of two alphabetic characters represented
with uppercase letters (i.e., A-Z).
This object MUST contain a non-null value if
the MplsOamIdMegOperatorType value is iccBased (2);
otherwise, a null value with octet size 0
should be assigned."
REFERENCE
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
Following ITU-T Conventions, May 2013, Section 3."
DEFVAL {""}
::= { mplsOamIdMegEntry 4 }
Aldrin, et al. Standards Track [Page 13]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMegIdIcc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique code assigned to a network operator or service
provider; maintained by the ITU-T. This is the
ITU Carrier Code used to form the MEGID.
This object MUST contain a non-null value if
the MplsOamIdMegOperatorType value is iccBased (2);
otherwise, a null value with octet size 0
should be assigned."
REFERENCE
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
Following ITU-T Conventions, May 2013, Section 3.1."
DEFVAL {""}
::= { mplsOamIdMegEntry 5 }
mplsOamIdMegIdUmc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..7))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique code assigned by a network operator or service
provider. This code is appended to mplsOamIdMegIdIcc to
form the MEGID.
This object MUST contain a non-null value if
the MplsOamIdMegOperatorType value is iccBased (2);
otherwise, a null value with octet size 0
should be assigned."
REFERENCE
"RFC 6923: MPLS Transport Profile (MPLS-TP) Identifiers
Following ITU-T Conventions, May 2013, Section 7.1."
DEFVAL {""}
::= { mplsOamIdMegEntry 6 }
Aldrin, et al. Standards Track [Page 14]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMegServicePointerType OBJECT-TYPE
SYNTAX INTEGER {
tunnel (1),
lsp (2),
pseudowire (3),
section (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the service type for the MEG.
If the service type indicates tunnel (1), the service
pointer in the mplsOamIdMeTable points to an entry in
the point-to-point mplsTunnelTable (RFC 3812).
If the service type indicates lsp (2), the service pointer
in the mplsOamIdMeTable points to an entry in
the co-routed or associated bidirectional mplsTunnelTable.
If the value is the pseudowire (3) service type, the
service pointer in the mplsOamIdMeTable points to an entry
in the pwTable (RFC 5601).
If the value is the section (4) service type, the service
pointer in the mplsOamIdMeTable points to an entry in
the mplsTunnelTable (RFC 3812)."
REFERENCE
"1. RFC 3812: Multiprotocol Label Switching (MPLS)
Traffic Engineering (TE) Management Information
Base (MIB), June 2004.
2. RFC 5601: Pseudowire (PW) Management Information
Base (MIB), July 2009."
DEFVAL { lsp }
::= { mplsOamIdMegEntry 7 }
Aldrin, et al. Standards Track [Page 15]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMegMpLocation OBJECT-TYPE
SYNTAX INTEGER {
perNode (1),
perInterface (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MP location type for this MEG.
If the value is perNode, then the MEG in the LSR supports
only perNode MEPs/MIPs, i.e., only one MEP/MIP in an LSR.
If the value is perInterface, then the MEG in the LSR
supports perInterface MEPs/MIPs, i.e., two MEPs/MIPs in
an LSR."
REFERENCE
"RFC 6371: Operations, Administration, and Maintenance
Framework for MPLS-Based Transport Networks,
September 2011."
DEFVAL { perNode }
::= { mplsOamIdMegEntry 8 }
mplsOamIdMegPathFlow OBJECT-TYPE
SYNTAX INTEGER {
unidirectionalPointToPoint (1),
coRoutedBidirectionalPointToPoint (2),
associatedBidirectionalPointToPoint (3),
unidirectionalPointToMultiPoint (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the transport path flow for this MEG.
In the case of a unidirectional point-to-point transport
path, a single unidirectional ME is defined to monitor it.
In the case of associated bidirectional point-to-point
transport paths, two independent unidirectional MEs are
defined to independently monitor each direction.
In the case of co-routed bidirectional point-to-point
transport paths, a single bidirectional ME is defined to
monitor both directions congruently.
In the case of unidirectional point-to-multipoint transport
paths, a single unidirectional ME for each leaf is defined
to monitor the transport path from the root to that leaf."
Aldrin, et al. Standards Track [Page 16]
RFC 7697 MPLS-TP OAM ID MIB January 2016
REFERENCE
"RFC 6371: Operations, Administration, and Maintenance
Framework for MPLS-Based Transport Networks,
September 2011."
DEFVAL { coRoutedBidirectionalPointToPoint }
::= { mplsOamIdMegEntry 9 }
mplsOamIdMegOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the operational status of the
Maintenance Entity Group (MEG). This object is used to
send the notification to the SNMP manager about the MEG.
The value up (1) indicates that the MEG and its monitored
path are operationally up. The value down (2) indicates
that the MEG is operationally down.
When the value of mplsOamIdMegOperStatus is up (1),
all the bits of mplsOamIdMegSubOperStatus must be cleared.
When the value of mplsOamIdMegOperStatus is down (2),
at least one bit of mplsOamIdMegSubOperStatus must be set."
::= { mplsOamIdMegEntry 10 }
mplsOamIdMegSubOperStatus OBJECT-TYPE
SYNTAX BITS {
megDown (0),
meDown (1),
oamAppDown (2),
pathDown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the reason why the MEG operational
status, as indicated by the object mplsOamIdMegOperStatus,
is down. This object is used to send the notification to
the SNMP manager about the MEG.
The bit 0 (megDown) indicates that the MEG is down.
The bit 1 (meDown) indicates that the ME table is down.
The bit 2 (oamAppDown) indicates that the OAM application
(LSP or PW) monitored by this MEG is down. Currently, BFD
Aldrin, et al. Standards Track [Page 17]
RFC 7697 MPLS-TP OAM ID MIB January 2016
is the only supported OAM application.
The bit 3 (pathDown) indicates that the underlying
LSP or PW is down."
::= { mplsOamIdMegEntry 11 }
mplsOamIdMegRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or delete
a row in this table. When a row in this table is in the
active(1) state, no objects in that row can be modified
by the agent except mplsOamIdMegRowStatus."
::= { mplsOamIdMegEntry 12 }
mplsOamIdMegStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row."
DEFVAL { volatile }
::= { mplsOamIdMegEntry 13 }
-- End of MPLS Transport Profile MEG table
-- Start of MPLS Transport Profile ME table
mplsOamIdMeIndexNext OBJECT-TYPE
SYNTAX IndexIntegerNextFree (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
mplsOamIdMeIndex, or a zero to indicate
that none exist. Negative values are not allowed,
as they do not correspond to valid values of
mplsOamIdMeIndex."
::= { mplsOamIdObjects 3 }
Aldrin, et al. Standards Track [Page 18]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMeMpIndexNext OBJECT-TYPE
SYNTAX IndexIntegerNextFree (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
mplsOamIdMeMpIndex, or a zero to indicate
that none exist. Negative values are not allowed,
as they do not correspond to valid values of
mplsOamIdMeMpIndex."
::= { mplsOamIdObjects 4 }
mplsOamIdMeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsOamIdMeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MPLS-TP ME information.
The ME is some portion of a transport path that requires
management bounded by two points (called MEPs), and the
relationship between those points to which maintenance
and monitoring operations apply.
This table is generic enough to handle MEP and MIP
information within a MEG."
::= { mplsOamIdObjects 5 }
mplsOamIdMeEntry OBJECT-TYPE
SYNTAX MplsOamIdMeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an MPLS-TP ME. This
entry represents the ME if the source and sink MEPs are
defined.
An ME is a point-to-point entity. One ME has two such
MEPs. A MEG is a group of one or more MEs. One MEG can
have two or more MEPs.
For a point-to-point LSP, one MEG has one ME, and this ME
is associated with two MEPs (source and sink MEPs) within
a MEG. Each mplsOamIdMeIndex value denotes the ME within
a MEG.
Aldrin, et al. Standards Track [Page 19]
RFC 7697 MPLS-TP OAM ID MIB January 2016
In the case of unidirectional point-to-point transport
paths, a single unidirectional ME is defined to monitor
it, and mplsOamIdMeServicePointer points to a
unidirectional point-to-point path.
In the case of associated bidirectional point-to-point
transport paths, two independent unidirectional
MEs are defined to independently monitor each direction,
and each mplsOamIdMeServicePointer MIB object points to a
unique unidirectional transport path.
This has implications for transactions that terminate at
or query a MIP, as a return path from a MIP to a source
MEP does not necessarily exist within the MEG.
In the case of co-routed bidirectional point-to-point
transport paths, a single bidirectional ME is defined to
monitor both directions congruently, and the
mplsOamIdMeServicePointer MIB object points to a co-routed
bidirectional point-to-point transport path.
In the case of unidirectional point-to-multipoint transport
paths, a single unidirectional ME for each leaf is defined
to monitor the transport path from the root to that leaf,
and each leaf has different transport path information in
the mplsOamIdMeServicePointer MIB object. Note that the
MplsOamIdMeEntry should be created manually once the MEG
is configured for OAM operations."
INDEX { mplsOamIdMegIndex,
mplsOamIdMeIndex,
mplsOamIdMeMpIndex
}
::= { mplsOamIdMeTable 1 }
MplsOamIdMeEntry ::= SEQUENCE {
mplsOamIdMeIndex Unsigned32,
mplsOamIdMeMpIndex Unsigned32,
mplsOamIdMeName SnmpAdminString,
mplsOamIdMeMpIfIndex InterfaceIndexOrZero,
mplsOamIdMeSourceMepIndex Unsigned32,
mplsOamIdMeSinkMepIndex Unsigned32,
mplsOamIdMeMpType INTEGER,
mplsOamIdMeMepDirection INTEGER,
mplsOamIdMeServicePointer RowPointer,
mplsOamIdMeRowStatus RowStatus,
mplsOamIdMeStorageType StorageType
}
Aldrin, et al. Standards Track [Page 20]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an ME index within a MEG. Managers
should obtain new values for row creation in this table by
reading mplsOamIdMeIndexNext."
::= { mplsOamIdMeEntry 1 }
mplsOamIdMeMpIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Maintenance Point (MP) index that is used to
create multiple MEPs in a node of a single ME. The value
of this object can be the MEP index or the MIP index.
Managers should obtain new values for row creation in this
table by reading mplsOamIdMeMpIndexNext."
::= { mplsOamIdMeEntry 2 }
mplsOamIdMeName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object denotes the ME name. Each ME has a unique
name within a MEG."
::= { mplsOamIdMeEntry 3 }
mplsOamIdMeMpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MP interface.
If the mplsOamIdMegMpLocation object value
is perNode (1), the MP interface index should point
to the incoming interface or outgoing interface, or
be zero (to indicate that the MP OAM packets are initiated
from the forwarding engine).
If the mplsOamIdMegMpLocation object value is
perInterface (2), the MP interface index should point to
the incoming interface or outgoing interface."
Aldrin, et al. Standards Track [Page 21]
RFC 7697 MPLS-TP OAM ID MIB January 2016
REFERENCE
"1. RFC 6371: Operations, Administration, and Maintenance
Framework for MPLS-Based Transport Networks,
September 2011.
2. RFC 2863: The Interfaces Group MIB, June 2000."
DEFVAL { 0 }
::= { mplsOamIdMeEntry 4 }
mplsOamIdMeSourceMepIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the source MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the MEG is configured for an IP-based operator,
the value of this object should be set to zero, and the
MEP ID will be automatically derived from the service
identifiers (MPLS-TP LSP/PW Identifier)."
DEFVAL { 0 }
::= { mplsOamIdMeEntry 5 }
mplsOamIdMeSinkMepIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the sink MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the MEG is configured for an IP-based operator,
the value of this object should be set to zero, and the
MEP ID will be automatically derived from the service
identifiers (MPLS-TP LSP/PW Identifier)."
DEFVAL { 0 }
::= { mplsOamIdMeEntry 6 }
Aldrin, et al. Standards Track [Page 22]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMeMpType OBJECT-TYPE
SYNTAX INTEGER {
mep (1),
mip (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the MP type within the MEG.
The object should have the value mep (1) only in the
ingress or egress nodes of the transport path.
The object can have the value mip (2) in the
intermediate nodes and possibly in the egress nodes
of the transport path."
DEFVAL { mep }
::= { mplsOamIdMeEntry 7 }
mplsOamIdMeMepDirection OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
notApplicable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the direction of the MEP. This object
should be configured if mplsOamIdMeMpType is configured
as mep (1); otherwise, notApplicable (3) is set."
DEFVAL { down }
::= { mplsOamIdMeEntry 8 }
mplsOamIdMeServicePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents a pointer to the MPLS-TP
transport path. This value MUST point at an entry in the
mplsTunnelEntry if mplsOamIdMegServicePointerType
is configured as tunnel (1), lsp (2), or section (4),
or at an entry in the pwEntry if
mplsOamIdMegServicePointerType is configured
as pseudowire (3).
Aldrin, et al. Standards Track [Page 23]
RFC 7697 MPLS-TP OAM ID MIB January 2016
Note: This service pointer object is placed in the ME table
instead of the MEG table, since it will be useful in the
point-to-multipoint case, where each ME will point to
different branches of a point-to-multipoint tree."
::= { mplsOamIdMeEntry 9 }
mplsOamIdMeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or delete
a row in this table. When a row in this table is in the
active(1) state, no objects in that row can be modified
by the agent except mplsOamIdMeRowStatus."
::= { mplsOamIdMeEntry 10 }
mplsOamIdMeStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this object.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row."
DEFVAL { volatile }
::= { mplsOamIdMeEntry 11 }
-- End of MPLS Transport Profile ME table
-- End of MPLS-TP OAM tables
Aldrin, et al. Standards Track [Page 24]
RFC 7697 MPLS-TP OAM ID MIB January 2016
-- Notification definitions of MPLS-TP identifiers
mplsOamIdDefectCondition NOTIFICATION-TYPE
OBJECTS {
mplsOamIdMegName,
mplsOamIdMeName,
mplsOamIdMegOperStatus,
mplsOamIdMegSubOperStatus
}
STATUS current
DESCRIPTION
"This notification is sent whenever the operational
status of the MEG is changed."
::= { mplsOamIdNotifications 1 }
-- End of notifications
-- Module compliance
mplsOamIdCompliances
OBJECT IDENTIFIER ::= { mplsOamIdConformance 1 }
mplsOamIdGroups
OBJECT IDENTIFIER ::= { mplsOamIdConformance 2 }
-- Compliance requirement for fully compliant implementations
mplsOamIdModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance statement for agents that provide full
support for the MPLS-TP-OAM-STD-MIB. Such devices
can then be monitored and also be configured
using this MIB module."
MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE -- this module
MANDATORY-GROUPS {
mplsOamIdMegGroup,
mplsOamIdMeGroup
}
Aldrin, et al. Standards Track [Page 25]
RFC 7697 MPLS-TP OAM ID MIB January 2016
GROUP mplsOamIdNotificationObjectsGroup
DESCRIPTION "This group is only mandatory for those
implementations that can efficiently implement
the notifications contained in this group."
GROUP mplsOamIdNotificationGroup
DESCRIPTION "This group is only mandatory for those
implementations that can efficiently implement
the notifications contained in this group."
::= { mplsOamIdCompliances 1 }
-- Compliance requirement for read-only implementations
mplsOamIdModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that only provide
read-only support for the MPLS-TP-OAM-STD-MIB module."
MODULE -- this module
MANDATORY-GROUPS {
mplsOamIdMegGroup,
mplsOamIdMeGroup
}
GROUP mplsOamIdNotificationObjectsGroup
DESCRIPTION "This group is only mandatory for those
implementations that can efficiently implement
the notifications contained in this group."
GROUP mplsOamIdNotificationGroup
DESCRIPTION "This group is only mandatory for those
implementations that can efficiently implement
the notifications contained in this group."
Aldrin, et al. Standards Track [Page 26]
RFC 7697 MPLS-TP OAM ID MIB January 2016
-- mplsOamIdMegTable
OBJECT mplsOamIdMegName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegOperatorType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegIdCc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegIdIcc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegIdUmc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegServicePointerType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegMpLocation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegPathFlow
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMegRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
Aldrin, et al. Standards Track [Page 27]
RFC 7697 MPLS-TP OAM ID MIB January 2016
OBJECT mplsOamIdMegStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- mplsOamIdMeTable
OBJECT mplsOamIdMeName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeMpIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeSourceMepIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeSinkMepIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeMpType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeMepDirection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeServicePointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOamIdMeRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
Aldrin, et al. Standards Track [Page 28]
RFC 7697 MPLS-TP OAM ID MIB January 2016
OBJECT mplsOamIdMeStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsOamIdCompliances 2 }
-- Units of conformance
mplsOamIdMegGroup OBJECT-GROUP
OBJECTS {
mplsOamIdMegIndexNext,
mplsOamIdMegName,
mplsOamIdMegOperatorType,
mplsOamIdMegIdCc,
mplsOamIdMegIdIcc,
mplsOamIdMegIdUmc,
mplsOamIdMegServicePointerType,
mplsOamIdMegMpLocation,
mplsOamIdMegOperStatus,
mplsOamIdMegSubOperStatus,
mplsOamIdMegPathFlow,
mplsOamIdMegRowStatus,
mplsOamIdMegStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS MEG information."
::= { mplsOamIdGroups 1 }
Aldrin, et al. Standards Track [Page 29]
RFC 7697 MPLS-TP OAM ID MIB January 2016
mplsOamIdMeGroup OBJECT-GROUP
OBJECTS {
mplsOamIdMeIndexNext,
mplsOamIdMeMpIndexNext,
mplsOamIdMeName,
mplsOamIdMeMpIfIndex,
mplsOamIdMeSourceMepIndex,
mplsOamIdMeSinkMepIndex,
mplsOamIdMeMpType,
mplsOamIdMeMepDirection,
mplsOamIdMeServicePointer,
mplsOamIdMeRowStatus,
mplsOamIdMeStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS ME information."
::= { mplsOamIdGroups 2 }
mplsOamIdNotificationObjectsGroup OBJECT-GROUP
OBJECTS {
mplsOamIdMegOperStatus,
mplsOamIdMegSubOperStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed to implement notifications."
::= { mplsOamIdGroups 3 }
mplsOamIdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mplsOamIdDefectCondition
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module."
::= { mplsOamIdGroups 4 }
END
Aldrin, et al. Standards Track [Page 30]
RFC 7697 MPLS-TP OAM ID MIB January 2016
8. Security Considerations
This MIB relates to a system that will provide network connectivity
and packet forwarding services. As such, improper manipulation of
the objects represented by this MIB may result in denial of service
to a large number of end-users.
There are a number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection opens devices to attack.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
- The mplsOamIdMegTable and the mplsOamIdMeTable collectively show
the MPLS OAM characteristics. If an administrator does not want to
reveal this information, then these tables should be considered
sensitive/vulnerable.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
there is no control as to who on the secure network is allowed to
access and GET/SET (read/change/create/delete) the objects in this
MIB module.
Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
Aldrin, et al. Standards Track [Page 31]
RFC 7697 MPLS-TP OAM ID MIB January 2016
9. IANA Considerations
As described in [RFC4221] and [RFC6639], and as requested in the
MPLS-TC-STD-MIB [RFC3811], MPLS-related Standards Track MIB modules
should be rooted under the mplsStdMIB subtree. The following
subsection lists a new assignment that has been made by IANA under
the mplsStdMIB subtree for the MPLS-OAM-ID-STD-MIB module defined in
this document. New assignments can only be made via a Standards
Action as specified in [RFC5226].
9.1. IANA Considerations for MPLS-OAM-ID-STD-MIB
IANA has to assign the OID { mplsStdMIB 21 } to the
MPLS-OAM-ID-STD-MIB module specified in this document.
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578,
DOI 10.17487/RFC2578, April 1999,
<http://www.rfc-editor.org/info/rfc2578>.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, DOI 10.17487/RFC2579, April 1999,
<http://www.rfc-editor.org/info/rfc2579>.
[RFC2580] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Conformance Statements for SMIv2",
STD 58, RFC 2580, DOI 10.17487/RFC2580, April 1999,
<http://www.rfc-editor.org/info/rfc2580>.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, DOI 10.17487/RFC2863, June 2000,
<http://www.rfc-editor.org/info/rfc2863>.
[RFC3031] Rosen, E., Viswanathan, A., and R. Callon, "Multiprotocol
Label Switching Architecture", RFC 3031,
DOI 10.17487/RFC3031, January 2001,
<http://www.rfc-editor.org/info/rfc3031>.
Aldrin, et al. Standards Track [Page 32]
RFC 7697 MPLS-TP OAM ID MIB January 2016
[RFC3289] Baker, F., Chan, K., and A. Smith, "Management Information
Base for the Differentiated Services Architecture",
RFC 3289, DOI 10.17487/RFC3289, May 2002,
<http://www.rfc-editor.org/info/rfc3289>.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
DOI 10.17487/RFC3411, December 2002,
<http://www.rfc-editor.org/info/rfc3411>.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414,
DOI 10.17487/RFC3414, December 2002,
<http://www.rfc-editor.org/info/rfc3414>.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826,
DOI 10.17487/RFC3826, June 2004,
<http://www.rfc-editor.org/info/rfc3826>.
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)",
STD 78, RFC 5591, DOI 10.17487/RFC5591, June 2009,
<http://www.rfc-editor.org/info/rfc5591>.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, DOI 10.17487/RFC5592,
June 2009, <http://www.rfc-editor.org/info/rfc5592>.
[RFC5601] Nadeau, T., Ed., and D. Zelig, Ed., "Pseudowire (PW)
Management Information Base (MIB)", RFC 5601,
DOI 10.17487/RFC5601, July 2009,
<http://www.rfc-editor.org/info/rfc5601>.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
STD 78, RFC 6353, DOI 10.17487/RFC6353, July 2011,
<http://www.rfc-editor.org/info/rfc6353>.
Aldrin, et al. Standards Track [Page 33]
RFC 7697 MPLS-TP OAM ID MIB January 2016
10.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410,
DOI 10.17487/RFC3410, December 2002,
<http://www.rfc-editor.org/info/rfc3410>.
[RFC3811] Nadeau, T., Ed., and J. Cucchiara, Ed., "Definitions of
Textual Conventions (TCs) for Multiprotocol Label
Switching (MPLS) Management", RFC 3811,
DOI 10.17487/RFC3811, June 2004,
<http://www.rfc-editor.org/info/rfc3811>.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812,
DOI 10.17487/RFC3812, June 2004,
<http://www.rfc-editor.org/info/rfc3812>.
[RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Label Switching
Router (LSR) Management Information Base (MIB)", RFC 3813,
DOI 10.17487/RFC3813, June 2004,
<http://www.rfc-editor.org/info/rfc3813>.
[RFC4221] Nadeau, T., Srinivasan, C., and A. Farrel, "Multiprotocol
Label Switching (MPLS) Management Overview", RFC 4221,
DOI 10.17487/RFC4221, November 2005,
<http://www.rfc-editor.org/info/rfc4221>.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
DOI 10.17487/RFC5226, May 2008,
<http://www.rfc-editor.org/info/rfc5226>.
[RFC5654] Niven-Jenkins, B., Ed., Brungard, D., Ed., Betts, M., Ed.,
Sprecher, N., and S. Ueno, "Requirements of an MPLS
Transport Profile", RFC 5654, DOI 10.17487/RFC5654,
September 2009, <http://www.rfc-editor.org/info/rfc5654>.
[RFC5860] Vigoureux, M., Ed., Ward, D., Ed., and M. Betts, Ed.,
"Requirements for Operations, Administration, and
Maintenance (OAM) in MPLS Transport Networks", RFC 5860,
DOI 10.17487/RFC5860, May 2010,
<http://www.rfc-editor.org/info/rfc5860>.
Aldrin, et al. Standards Track [Page 34]
RFC 7697 MPLS-TP OAM ID MIB January 2016
[RFC6370] Bocci, M., Swallow, G., and E. Gray, "MPLS Transport
Profile (MPLS-TP) Identifiers", RFC 6370,
DOI 10.17487/RFC6370, September 2011,
<http://www.rfc-editor.org/info/rfc6370>.
[RFC6371] Busi, I., Ed., and D. Allan, Ed., "Operations,
Administration, and Maintenance Framework for MPLS-Based
Transport Networks", RFC 6371, DOI 10.17487/RFC6371,
September 2011, <http://www.rfc-editor.org/info/rfc6371>.
[RFC6639] King, D., Ed., and M. Venkatesan, Ed., "Multiprotocol
Label Switching Transport Profile (MPLS-TP) MIB-Based
Management Overview", RFC 6639, DOI 10.17487/RFC6639,
June 2012, <http://www.rfc-editor.org/info/rfc6639>.
[RFC6923] Winter, R., Gray, E., van Helvoort, H., and M. Betts,
"MPLS Transport Profile (MPLS-TP) Identifiers Following
ITU-T Conventions", RFC 6923, DOI 10.17487/RFC6923,
May 2013, <http://www.rfc-editor.org/info/rfc6923>.
Acknowledgments
We wish to thank Muly Ilan, Adrian Farrel, Joan Cucchiara, Weiying
Cheng, Mach Chen, Peter Yee, and Tina TSOU for their valuable
comments on this document.
The coauthors of this document, the working group chairs, the
document shepherd, the responsible AD, and the MPLS Working Group
wish to dedicate this RFC to the memory of our friend and colleague
Ping Pan, in recognition for his devotion and hard work at the IETF.
Aldrin, et al. Standards Track [Page 35]
RFC 7697 MPLS-TP OAM ID MIB January 2016
Authors' Addresses
Ping Pan
Infinera
Sam Aldrin
Google, Inc.
1600 Amphitheatre Parkway
Mountain View, CA 94043
United States
Email: aldrin.ietf@gmail.com
Venkatesan Mahalingam
Dell, Inc.
5450 Great America Parkway
Santa Clara, CA 95054
United States
Email: venkat.mahalingams@gmail.com
Kannan KV Sampath
Redeem
India
Email: kannankvs@gmail.com
Thomas D. Nadeau
Brocade
Email: tnadeau@lucidvision.com
Sami Boutros
VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
United States
Email: sboutros@vmware.com
Aldrin, et al. Standards Track [Page 36]