<- RFC Index (6301..6400)
RFC 6381
Obsoletes RFC 4281
Updates RFC 3839, RFC 4393, RFC 4337
Internet Engineering Task Force (IETF) R. Gellens
Request for Comments: 6381 QUALCOMM, Inc.
Obsoletes: 4281 D. Singer
Updates: 3839, 4337, 4393 Apple, Inc.
Category: Standards Track P. Frojdh
ISSN: 2070-1721 Ericsson AB
August 2011
The 'Codecs' and 'Profiles' Parameters for "Bucket" Media Types
Abstract
Several MIME type/subtype combinations exist that can contain
different media formats. A receiving agent thus needs to examine the
details of such media content to determine if the specific elements
can be rendered given an available set of codecs. Especially when
the end system has limited resources, or the connection to the end
system has limited bandwidth, it is helpful to know from the Content-
Type alone if the content can be rendered.
This document specifies two parameters, 'codecs' and 'profiles', that
are used with various MIME types or type/subtype combinations to
allow for unambiguous specification of the codecs employed by the
media formats contained within, or the profile(s) of the overall
container format. This document obsoletes RFC 4281; RFC 4281 defines
the 'codecs' parameter, which this document retains in a backwards
compatible manner with minor clarifications; the 'profiles' parameter
is added by this document.
By labeling content with the specific codecs indicated to render the
contained media, receiving systems can determine if the codecs are
supported by the end system, and if not, can take appropriate action
(such as rejecting the content, sending notification of the
situation, transcoding the content to a supported type, fetching and
installing the required codecs, further inspection to determine if it
will be sufficient to support a subset of the indicated codecs,
etc.).
Similarly, the profiles can provide an overall indication, to the
receiver, of the specifications with which the content complies.
This is an indication of the compatibility of the container format
and its contents to some specification. The receiver may be able to
work out the extent to which it can handle and render the content by
examining to see which of the declared profiles it supports, and what
they mean.
Gellens, et al. Standards Track [Page 1]
RFC 6381 MIME Codecs and Profiles August 2011
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6381.
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Gellens, et al. Standards Track [Page 2]
RFC 6381 MIME Codecs and Profiles August 2011
Table of Contents
1. Introduction ....................................................3
2. Conventions Used in This Document ...............................5
3. The 'Codecs' Parameter ..........................................5
3.1. Introduction ...............................................5
3.2. Generic Syntax .............................................7
3.3. ISO Base Media File Format Name Space ......................8
3.4. ISO-Family Syntax .........................................11
3.5. Use in Additional Media Types .............................11
3.6. Examples ..................................................12
3.7. Additional Media Feature Details ..........................12
4. The 'Profiles' Parameter .......................................12
4.1. Introduction ..............................................12
4.2. Formal Declaration ........................................13
4.3. 'Profiles' Parameter Definition ...........................14
4.4. Profiles for Files Carrying MP4RA-Registered Brands .......14
4.5. 'Profiles' Parameter BNF Definition .......................15
5. IANA Considerations ............................................15
6. Registration ...................................................15
7. Security Considerations ........................................16
8. Differences from RFC 4281 ......................................16
9. Acknowledgements ...............................................17
10. References ....................................................17
10.1. Normative References .....................................17
10.2. Informative References ...................................18
1. Introduction
One of the original motivations for MIME is the ability to identify
the specific media type of a message part. However, due to various
factors, it is not always possible from looking at the MIME type and
subtype to know which specific media formats are contained in the
body part or which codecs are indicated in order to render the
content.
There are several media type/subtypes (either currently registered or
deployed with registration pending) that contain codecs chosen from a
set. In the absence of the parameters described here, it is
necessary to examine each media element in order to determine the
codecs or other features required to render the content. For
example, video/3gpp may contain any of the video formats H.263
Profile 0, H.263 Profile 3, H.264, MPEG-4 Simple Profile, and/or any
of the audio formats Adaptive Multi Rate (AMR), Adaptive Multi Rate -
WideBand (AMR-WB), Extended AMR-WB, Advanced Audio Coding (AAC), or
Enhanced aacPlus, as specified in [3GPP-Formats].
Gellens, et al. Standards Track [Page 3]
RFC 6381 MIME Codecs and Profiles August 2011
In some cases, the specific codecs can be determined by examining the
header information of the media content. While this isn't as bad as
examining the entire content, it still requires specialized knowledge
of each format and is resource consumptive.
This ambiguity can be a problem for various clients and servers. For
example, it presents a significant burden to Multimedia Messaging
(MMS) servers, which must examine the media sent in each message in
order to determine which codecs are required to render the content.
Only then can such a server determine if the content requires
transcoding or specialized handling prior to being transmitted to the
handset.
Additionally, it presents a challenge to smart clients on devices
with constrained memory, processing power, or transmission bandwidth
(such as cellular telephones and PDAs). Such clients often need to
determine in advance if they are currently capable of rendering the
content contained in an MMS or email message.
Ambiguity:
o audio/3gpp can contain AMR, AAC, AMR-WB, Extended AMR-WB, or
Enhanced aacPlus contents as specified in [3GPP-Formats].
o audio/3gpp2 can contain AMR, AAC, 13K (as per [RFC3625]), Enhanced
Variable Rate Codec (EVRC), Selectable Mode Vocoder (SMV), or
Variable Multi Rate WideBand (VMR-WB), as specified in
[3GPP2-Formats].
o video/3gpp can contain H.263 Profile 0, H.263 Profile 3, H.264,
MPEG-4 Simple Profile, and/or AMR, AMR-WB, Extended AMR-WB, AAC,
or Enhanced aacPlus, as specified in [3GPP-Formats].
o video/3gpp2 can contain H.263 Profile 0, H.263 Profile 3, H.264,
MPEG-4 Simple Profile, and/or AMR, AAC, 13K (as per [RFC3625]),
EVRC, SMV, or VMR-WB, as specified in [3GPP2-Formats].
o audio/mp4 can include any codec defined in MPEG-1, MPEG-2, MPEG-4
or registered at the MP4 registration authority [MP4RA].
o video/mp4 has the same issues as audio/mp4, and in addition many
video codecs, and especially the MPEG codecs, have a variety of
profiles and levels, not all of which are supported by every
implementation.
Gellens, et al. Standards Track [Page 4]
RFC 6381 MIME Codecs and Profiles August 2011
Note that there are additional media types that are ambiguous, but
are outside the scope of this document, including:
o video/mpeg4-generic, which can contain anything allowed by the
MPEG-4 specification, or any codec registered with the MP4
registration authority [MP4RA];
With each "bucket" type, a receiving agent only knows that it has a
container format. It doesn't even know whether content that is
labeled video/3gpp or video/3gpp2 contains video; it might be audio
only, audio and video, or video only.
A solution that permits a receiving agent to determine the specific
codecs or profiles required to render media content would help
provide efficient and scalable servers, especially for Multimedia
Messaging (MMS), and aid the growth of multimedia services in
wireless networks.
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in "Key words for use in
RFCs to Indicate Requirement Levels" [RFC2119] .
The syntax in this document uses the BNF rules specified in [RFC2045]
and [RFC2231].
3. The 'Codecs' Parameter
3.1. Introduction
This section adds a parameter to allow unambiguous specification of
all codecs indicated to render the content in the MIME part. This
parameter is optional in all current types to which it is added.
Future types that contain ambiguity are strongly encouraged to
include this parameter.
This parameter applies to:
1. Files in the family based on the ISO Base Media File Format
[ISO14496-12] called "ISO family files" in this specification.
2. The QuickTime file format, owned by Apple, Inc.
This includes the media types:
1. audio/3gpp, video/3gpp [RFC3839]
Gellens, et al. Standards Track [Page 5]
RFC 6381 MIME Codecs and Profiles August 2011
2. audio/3gpp2, video/3gpp2 [RFC4393]
3. audio/mp4, video/mp4, application/mp4 [RFC4337]
4. video/quicktime
5. application/mp21 (see note below)
Note that MPEG-21 files under the type application/mp21 may, but are
not required to, contain a top-level 'moov' atom providing a timed,
coded, resource. The 'codecs' parameter SHOULD only be used for
MPEG-21 files when this timed material is also present in the file.
Parameter name: codecs
Parameter value: A single value, or a comma-separated list of values
identifying the codec(s) indicated to render the content in the body
part.
Each value consists of one or more dot-separated elements. The name
space for the first element is determined by the MIME type. The name
space for each subsequent element is determined by the preceding
element. The precise syntax is given below in the Generic Syntax
(Section 3.2).
Note that, per [RFC2045], some characters (including the comma used
to separate multiple values) require that the entire parameter value
be enclosed in quotes.
An element MAY include an octet that [RFC2045] requires encoding. In
this case, [RFC2231] is used: an asterisk ("*") is placed at the end
of the parameter name (becoming 'codecs*' instead of 'codecs'), the
parameter value usually starts with two single quote ("'") characters
(indicating that neither character set nor language is specified),
and each octet that requires encoding is represented as a percent
sign ("%") followed by two hexadecimal digits. Note that, when the
[RFC2231] form is used, the percent sign, asterisk, and single quote
characters have special meaning and so MUST themselves be percent
encoded.
Examples of Generic Syntax:
codecs=a.bb.ccc.d
codecs="a.bb.ccc.d, e.fff"
codecs*=''fo%2e
codecs*="''%25%20xz, gork"
Gellens, et al. Standards Track [Page 6]
RFC 6381 MIME Codecs and Profiles August 2011
When the 'codecs' parameter is used, it MUST contain all codecs
indicated by the content present in the body part. The 'codecs'
parameter MUST NOT include any codecs that are not indicated by any
media elements in the body part.
In some cases, not all indicated codecs are absolutely required in
order to render the content. Therefore, when a receiver does not
support all listed codecs, special handling might be required. For
example, the media element(s) could be examined in order to determine
if an unsupported codec is actually required (e.g., there may be
alternative tracks (such as English and Spanish audio), there may be
timed text that can be dropped, etc.).
Although the encoder MUST create parameter values that are complete
and accurate in 'breadth' (that is, the encoder MUST report all four-
character codes used in all tracks for ISO family files, for example)
receivers MUST NOT rely on the parameter values being complete in
'depth'. (If the hierarchical rules for a given code (e.g., 'qvxy')
were written after a server was implemented, for example, that server
would not know what elements to place after 'qvxy').
Although a mismatch is not permitted by this specification, the body
part is definitive of the actual codecs needed; the parameter
supplied here is informative. If a receiver encounters a body part
whose 'codecs' parameter contains codecs that are not indicated by
any media elements, then the receiver SHOULD process the body part by
discarding the information in the 'codecs' parameter.
If a receiver encounters a body part whose 'codecs' parameter does
not contain all codecs indicated by the media elements, then the
receiver MAY process the body part by discarding the information in
the 'codecs' parameter.
3.2. Generic Syntax
The 'codecs' parameter takes either of two forms. The first form is
used when the value does not contain any octets that require
encoding. The second form uses [RFC2231] to allow arbitrary octets
to be encoded. With either form, quotes allow for commas and other
characters in <tspecials> (quotes MAY be used even when not
required).
This BNF uses the rules specified in [RFC2045] and [RFC2231].
While [RFC2231] allows specification of character set and language,
this parameter does not contain items intended for human consumption,
and hence makes no use of language. The language element SHOULD be
Gellens, et al. Standards Track [Page 7]
RFC 6381 MIME Codecs and Profiles August 2011
omitted; the character set SHOULD also be omitted. A receiver MAY
ignore language and MAY choose to support only US-ASCII [RFC1345] and
UTF-8 [RFC3629].
Implementations MUST NOT add comments and/or folding white space
(CFWS) between the tokens except after ",". TOKEN is defined in
[RFC2045], and <ext-octet> and <attribute-char> are defined in
[RFC2231].
The BNF syntax is as follows:
codecs := cod-simple / cod-fancy
cod-simple := "codecs" "=" unencodedv
unencodedv := id-simple / simp-list
simp-list := DQUOTE id-simple *( "," id-simple ) DQUOTE
id-simple := element
; "." reserved as hierarchy delimiter
element := 1*octet-sim
octet-sim := <any TOKEN character>
; Within a 'codecs' parameter value, "." is reserved
; as a hierarchy delimiter
cod-fancy := "codecs*" "=" encodedv
encodedv := fancy-sing / fancy-list
fancy-sing := [charset] "'" [language] "'" id-encoded
; Parsers MAY ignore <language>
; Parsers MAY support only US-ASCII and UTF-8
fancy-list := DQUOTE [charset] "'" [language] "'" id-list DQUOTE
; Parsers MAY ignore <language>
; Parsers MAY support only US-ASCII and UTF-8
id-list := id-encoded *( "," id-encoded )
id-encoded := encoded-elm *( "." encoded-elm )
; "." reserved as hierarchy delimiter
encoded-elm := 1*octet-fancy
octet-fancy := ext-octet / attribute-char
DQUOTE := %x22 ; " (double quote)
Initial name space: This document only defines values for files in
the ISO Base Media File Format and QuickTime families. Other file
formats may also define codec naming.
3.3. ISO Base Media File Format Name Space
For the ISO Base Media File Format, and the QuickTime movie file
format, the first element of a 'codecs' parameter value is a sample
description entry four-character code as registered by the MP4
Registration Authority [MP4RA]. Values are case sensitive.
Gellens, et al. Standards Track [Page 8]
RFC 6381 MIME Codecs and Profiles August 2011
Note that there are potentially multiple tracks in a file, each
potentially carrying multiple sample entries (some but not all uses
of the ISO Base Media File Format restrict the number of sample
entries in a track to one).
When the first element of a value is 'mp4a' (indicating some kind of
MPEG-4 audio), or 'mp4v' (indicating some kind of MPEG-4 part-2
video), or 'mp4s' (indicating some kind of MPEG-4 Systems streams
such as MPEG-4 BInary Format for Scenes (BIFS)), the second element
is the hexadecimal representation of the MP4 Registration Authority
ObjectTypeIndication (OTI), as specified in [MP4RA] and [MP41]
(including amendments). Note that [MP4RA] uses a leading "0x" with
these values, which is omitted here and hence implied.
One of the OTI values for 'mp4a' is 40 (identifying MPEG-4 audio).
For this value, the third element identifies the audio
ObjectTypeIndication (OTI) as defined in [MP4A] (including
amendments), expressed as a decimal number.
For example, AAC low complexity (AAC-LC) has the value 2, so a
complete string for AAC-LC would be "mp4a.40.2".
One of the OTI values for 'mp4v' is 20 (identifying MPEG-4 part-2
video). For this value, the third element identifies the video
ProfileLevelIndication as defined in [MP4V] (including amendments),
expressed as a decimal number.
For example, MPEG-4 Visual Simple Profile Level 0 has the value 9, so
a complete string for MPEG-4 Visual Simple Profile Level 0 would be
"mp4v.20.9".
When the first element of a value is a code indicating a codec from
the Advanced Video Coding specification [AVC], specifically one of
the sample entries defined in [AVC-Formats] (such as 'avc1', 'avc2',
'svc1', 'mvc1', and 'mvc2') -- indicating AVC (H.264), Scalable Video
Coding (SVC), or Multiview Video Coding (MVC), the second element
(referred to as 'avcoti' in the formal syntax) is the hexadecimal
representation of the following three bytes in the (subset) sequence
parameter set Network Abstraction Layer (NAL) unit specified in
[AVC]:
(1) profile_idc,
(2) the byte containing the constraint_set flags (currently
constraint_set0_flag through constraint_set5_flag, and the
reserved_zero_2bits), and
(3) level_idc.
Gellens, et al. Standards Track [Page 9]
RFC 6381 MIME Codecs and Profiles August 2011
Note that the sample entries 'avc1' and 'avc2' do not necessarily
indicate that the media only contains AVC NAL units. In fact, the
media may be encoded as an SVC or MVC profile and thus contain SVC or
MVC NAL units. In order to be able to determine which codec is used,
further information is necessary (profile_idc). Note also that
reserved_zero_2bits is required to be equal to 0 in [AVC], but other
values for it may be specified in the future by ITU-T or ISO/IEC.
This is as previously defined in the 3GPP File Format specification
3GPP TS 26.244 [3GPP-Formats], Section A.2.2.
When SVC or MVC content is coded in an AVC-compatible fashion, the
sample description may include both an AVC configuration record and
an SVC or MVC configuration record. Under those circumstances, it is
recommended that the two configuration records both be reported as
they may contain different AVC profile, level, and compatibility
indicator values. Thus, the codecs reported would include the sample
description code (e.g., 'avc1') twice, with the values from one of
the configuration records forming the 'avcoti' information in each.
Gellens, et al. Standards Track [Page 10]
RFC 6381 MIME Codecs and Profiles August 2011
3.4. ISO-Family Syntax
id-simple :=/ id-iso
id-encoded :=/ id-iso
id-iso := iso-gen / iso-mpega / iso-mpegv / iso-avc
iso-gen := cpid *( element / encoded-elm )
; <element> used with <codecs-simple>
; <encoded-elm> used with <codecs-fancy>
;
; Note that the BNF permits "." within <element>
; and <encoded-elm> but "." is reserved as the
; hierarchy delimiter
iso-mpega := mp4a "." oti [ "." aud-oti ]
iso-mpegv := mp4v "." oti [ "." vid-pli ]
iso-avc := avc1 / avc2 / svc1 / mvc1 / mvc2 [ "." avcoti ]
cpid := 4(octet-simple / octet-fancy)
; <octet-simple> used with <codecs-simple>
; <octet-fancy> used with <codecs-fancy>
mp4a := %x6d.70.34.61 ; 'mp4a'
oti := 2(DIGIT / "A" / "B" / "C" / "D" / "E" / "F")
; leading "0x" omitted
avc1 := %x61.76.63.31 ; 'avc1'
avc2 := %x61.76.63.32 ; 'avc2'
svc1 := %x73.76.63.31 ; 'svc1'
mvc1 := %x6d.76.63.31 ; 'mvc1'
mvc2 := %x6d.76.63.32 ; 'mvc2'
avcoti := 6(DIGIT / "A" / "B" / "C" / "D" / "E" / "F")
; leading "0x" omitted
aud-oti := 1*DIGIT
mp4v := %x6d.70.34.76 ; 'mp4v'
vid-pli := 1*DIGIT
3.5. Use in Additional Media Types
This parameter MAY be specified for use with additional MIME media
types.
For ISO family file formats where the name space as defined here is
sufficient, all that needs to be done is to update the media type
registration to specify the 'codecs' parameter with a reference to
this document. For existing media types, it is generally advisable
for the parameter to be optional; for new media types, the parameter
MAY be optional or required, as appropriate.
For ISO family file formats where the name space as defined here
needs to be expanded, a new document MAY update this one by
specifying the additional detail.
Gellens, et al. Standards Track [Page 11]
RFC 6381 MIME Codecs and Profiles August 2011
For non-ISO family file formats, a new document MAY update this one
by specifying the name space for the media type(s).
3.6. Examples
Content-Type: video/3gpp2; codecs="sevc, s263"
(EVRC audio plus H.263 video)
Content-Type: audio/3gpp; codecs=samr
(AMR audio)
Content-Type: video/3gpp; codecs="s263, samr"
(H.263 video plus AMR audio)
Content-Type: audio/3gpp2; codecs=mp4a.E1
(13K audio)
Content-Type: video/3gpp2; codecs="mp4v.20.9, mp4a.E1"
(MPEG-4 Visual Simple Profile Level 0 plus 13K voice)
Content-Type: video/mp4; codecs="avc1.640028"
(H.264/AVC video, High Profile, Level 40,
e.g., DVB 720p 50Hz HDTV)
Content-Type: video/mp4; codecs="svc1.56401E, avc1.4D401E"
(SVC video, Scalable High Profile, Level 30,
with a Main Profile AVC base layer, e.g., DVB 25 Hz SDTV)
Content-Type: video/mp4; codecs="mvc1.800030, avc1.640030"
(MVC video, Stereo High Profile, Level 42,
with a High Profile base layer, e.g., as adopted in Blu-ray)
Note: OTI value 20 ("0x20" in [MP4RA]) says "Includes associated
Amendment(s) and Corrigendum(a). The actual object types are defined
in [MP4V] and are conveyed in the DecoderSpecificInfo as specified in
[MP4V], Annex K." (references adjusted).
3.7. Additional Media Feature Details
It is sometimes helpful to provide additional details for a media
element (e.g., the number of X and Y pixels, the color depth, etc.).
These details are sometimes called "media features" or "media
characteristics".
When such additional features are included, the content-features
[RFC2912] header provides a handy way to do so.
4. The 'Profiles' Parameter
4.1. Introduction
Just as some codecs have a variety of profiles (subsets of their
functionality within which a bitstream can be coded), some media
files can also be profiled and be associated with one or more profile
identifiers of the profiles to which they conform. These profiles
Gellens, et al. Standards Track [Page 12]
RFC 6381 MIME Codecs and Profiles August 2011
can indicate features of the file format itself, which codecs may be
present, the profiles of those codecs, and so on. It can be
advantageous to a receiving system to know the overall file
profile(s) of a file; indeed, under these circumstances it may not be
necessary to know the codecs themselves if they are implied by the
profile.
The 'profiles' parameter reports on the profile(s) of the overall
container format. A profile of the container format may have
restrictions on not only the features of the container format itself
but also on what codecs may be included, and it may indeed have
restrictions on the profiles of those codecs. The 'profiles'
parameter does not, however, report directly any profiles of the
contained media: when such codec-specific profiles are reported, this
report is part of the 'codecs' parameter. The 'profiles' parameter
reports only the profile(s) applying to the complete container.
When the use of the 'profiles' parameter is defined for a given
format, that definition SHOULD indicate that it directly reflects
information in the body part, i.e., that it does not convey
information beyond, or different from, what can be learnt by
inspecting the body part. Although a mismatch is not permitted by
this specification, the body part is definitive of the actual
profiles; the parameter supplied here is informative.
4.2. Formal Declaration
This section adds a parameter to allow unambiguous specification of
the profiles to which a file claims conformance. This parameter is
OPTIONAL in all current types to which it is added.
This parameter applies to Box-structured (also known as atom-
structured) files that have an initial box containing compatibility
brands, as registered at the MP4 Registration Authority [MP4RA], such
as a filetype or segment-type box. Principally, this includes files
in the family based on the ISO Base Media File Format [ISO14496-12]
and the QuickTime file format, owned by Apple, Inc. (A brand can
indicate conformance with restrictions regarding which codecs and
file format features are used, adherence to quantitative limits such
as the length/size of the file, and so on.)
This includes the media types:
1. audio/3gpp, video/3gpp [RFC3839]
2. audio/3gpp2, video/3gpp2 [RFC4393]
3. audio/mp4, video/mp4 [RFC4337]
Gellens, et al. Standards Track [Page 13]
RFC 6381 MIME Codecs and Profiles August 2011
4. video/quicktime
5. application/mp21
Parameter name: profiles
Parameter value: A single value, or a comma-separated list of values
identifying the profiles(s) to which the file claims conformance.
The name space is determined by the MIME type.
Note that, per [RFC2045], some characters (including the comma used
to separate multiple values) require that the entire parameter value
be enclosed in quotes.
An element MAY include an octet that [RFC2045] requires encoding. In
this case, [RFC2231] is used: an asterisk ("*") is placed at the end
of the parameter name (becoming 'profiles*' instead of 'profiles'),
the parameter value usually starts with two single quote ("'")
characters(indicating that neither character set nor language is
specified), and each octet that requires encoding is represented as a
percent sign ("%") followed by two hexadecimal digits. Note that,
when the [RFC2231] form is used, the percent sign, asterisk, and
single quote characters have special meaning and so MUST themselves
be percent encoded.
Examples of Generic Syntax:
profiles="isom,mp41,qvXt"
profiles*="''%25%20xz, gork"
4.3. 'Profiles' Parameter Definition
The 'profiles' parameter is an OPTIONAL parameter that indicates one
or more profiles to which the file claims conformance. Like the
'codecs' parameter described above, it may occur as either 'profiles'
or 'profiles*', with the same encoding rules. The value is, as for
the 'codecs' parameter, a comma-separated list of profile
identifiers.
4.4. Profiles for Files Carrying MP4RA-Registered Brands
For any file format carrying a brand registered at the MP4
Registration Authority [MP4RA], notably files based on the ISO Base
Media File Format ISO/IEC 14496-12 [ISO14496-12] and QuickTime movie
files, the 'profiles' parameter MUST list exactly the major-brand,
followed by the compatible-brands, as listed in the filetype box
('ftyp') or segment-type box ('styp'). The major-brand MUST be
first, and MAY be removed from the compatible-brands list. (The file
Gellens, et al. Standards Track [Page 14]
RFC 6381 MIME Codecs and Profiles August 2011
format requires that it be repeated in the compatible-brands, but
this requirement is relaxed here for compactness.)
An example might be profiles="mp41,isom,qvXt", indicating that MPEG-4
version 1 is the major-brand and preferred use, that the file is
compatible with the version of the base file format identified by
'isom', and that it is also compatible with the specification/profile
'qvXt' (whatever that may be).
4.5. 'Profiles' Parameter BNF Definition
profiles := pro-simple / pro-fancy
pro-simple := "profiles" "=" unencodedv
pro-fancy := "profiles*" "=" encodedv
5. IANA Considerations
IANA has replaced references to [RFC4281] with references to this
document in the "MIME Media Types" registry, thereby indicating that
the 'codecs' and/or 'profiles' parameters are optional for the
following media types (as listed in Sections 3 and 4):
1. audio/3gpp, video/3gpp [RFC3839]
2. audio/3gpp2, video/3gpp2 [RFC4393]
3. audio/mp4, video/mp4, application/mp4 [RFC4337]
4. video/quicktime
5. application/mp21
6. Registration
The MPEG4 Registration Authority can be consulted for the most up-to-
date registration of sub-parameters for the codecs type, for specific
codecs.
Gellens, et al. Standards Track [Page 15]
RFC 6381 MIME Codecs and Profiles August 2011
7. Security Considerations
The 'codecs' parameter itself does not alter the security
considerations of any of the media types with which it is used. Each
audio and video media type has its own set of security considerations
that continue to apply, regardless of the use of the 'codecs'
parameter.
An incorrect 'codecs' parameter might cause media content to be
received by a device that is not capable of rendering it or might
cause media content not to be sent to a device that is capable of
receiving it. An incorrect 'codecs' parameter is therefore capable
of some types of denial-of-service attacks. However, this is most
likely to arise by accident, as an attacker capable of altering media
data in transit could cause more harm by altering the media format
itself, or even the content type header, rather than just the
'codecs' parameter of the content type header.
To the extent that a receiver reacts to a 'codecs' parameter that
indicates an unsupported codec, by fetching and installing the
required codecs, such reaction needs to be performed carefully and in
accord with the system's normal validity and security checks and
procedures.
8. Differences from RFC 4281
1. Improved the introduction and other supporting and explanatory
text;
2. improved the references;
3. clarified the MIME types to which the parameters apply, and
clarified the consequent IANA actions;
4. added the 'profiles' parameter;
5. fixed an error in the BNF, where it did not correspond to either
the examples or common usage;
6. added the definition of the sub-parameters for the AVC family of
codecs;
7. added a security consideration for possible triggering of
downloads;
8. updated acknowledgments.
Gellens, et al. Standards Track [Page 16]
RFC 6381 MIME Codecs and Profiles August 2011
9. Acknowledgements
Harinath Garudadri provided a great deal of help, which is very much
appreciated. Mary Barnes and Bruce Lilly provided detailed and
helpful comments. Reviews and comments by Sam Hartman, Russ Housley,
and Bert Wijnen were much appreciated. Chris Newman carefully
reviewed and improved the BNF.
Christian Timmerer helped with the MPEG-21 material, and Thomas
Schierl and Yago Sanchez helped with SVC and MVC.
10. References
10.1. Normative References
[3GPP-Formats] 3rd Generation Partnership Project, "Technical
Specification Group Services and System Aspects;
Transparent end-to-end packet switched streaming
service (PSS); 3GPP file format (3GP)", 3GPP
TS 26.244.
[AVC] "Advanced video coding for generic audiovisual
services", ITU-T Recommendation H.264, ISO/
IEC 14496-10:2009.
[AVC-Formats] "Information technology -- Coding of audio-visual
objects -- Part 15: Advanced Video Coding (AVC) file
format", ISO/IEC 14496-15:2010.
[ISO14496-12] "Information technology -- Coding of audio-visual
objects -- Part 12: ISO base media file format",
ISO/IEC 14496-12:2008.
[MP4RA] "MP4REG, The MPEG-4 Registration Authority",
<http://www.mp4ra.org>.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet
Mail Extensions (MIME) Part One: Format of Internet
Message Bodies", RFC 2045, November 1996.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2231] Freed, N. and K. Moore, "MIME Parameter Value and
Encoded Word Extensions:
Character Sets, Languages, and Continuations",
RFC 2231, November 1997.
Gellens, et al. Standards Track [Page 17]
RFC 6381 MIME Codecs and Profiles August 2011
[RFC2912] Klyne, G., "Indicating Media Features for MIME
Content", RFC 2912, September 2000.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[RFC3839] Castagno, R. and D. Singer, "MIME Type Registrations
for 3rd Generation Partnership Project (3GPP)
Multimedia files", RFC 3839, July 2004.
[RFC4281] Gellens, R., Singer, D., and P. Frojdh, "The Codecs
Parameter for "Bucket" Media Types", RFC 4281,
November 2005.
[RFC4337] Y Lim and D. Singer, "MIME Type Registration for
MPEG-4", RFC 4337, March 2006.
[RFC4393] Garudadri, H., "MIME Type Registrations for 3GPP2
Multimedia Files", RFC 4393, March 2006.
10.2. Informative References
[3GPP2-Formats] Third Generation Partnership Project 2, "3GPP2 File
Formats for Multimedia Service", <http://
www.3gpp2.org/Public_html/specs/
C.S0050-0_v1.0_121503.pdf>.
[MP41] "Information technology--Coding of audio-visual
objects -- Part 1: Systems", ISO/IEC 14496-1:2010.
[MP4A] "Information technology--Coding of audio-visual
objects -- 3: Audio", ISO/IEC 14496-3:2009.
[MP4V] "Information technology--Coding of audio-visual
objects -- Part 2: Visual", ISO/IEC 14496-2:2004.
[RFC1345] Simonsen, K., "Character Mnemonics and Character
Sets", RFC 1345, June 1992.
[RFC3625] Gellens, R. and H. Garudadri, "The QCP File Format
and Media Types for Speech Data", RFC 3625,
September 2003.
Gellens, et al. Standards Track [Page 18]
RFC 6381 MIME Codecs and Profiles August 2011
Authors' Addresses
Randall Gellens
QUALCOMM Incorporated
5775 Morehouse Drive
San Diego, CA 92121
US
EMail: rg+ietf@qualcomm.com
David Singer
Apple, Inc.
1 Infinite Loop
Cupertino, CA 95014
US
Phone: +1 408 996 1010
EMail: singer@apple.com
Per Frojdh
Ericsson AB
Ericsson Research
Stockholm SE-164 80
Sweden
Phone: +46 10 7190000
EMail: Per.Frojdh@ericsson.com
Gellens, et al. Standards Track [Page 19]