<- RFC Index (6601..6700)
RFC 6690
Internet Engineering Task Force (IETF) Z. Shelby
Request for Comments: 6690 Sensinode
Category: Standards Track August 2012
ISSN: 2070-1721
Constrained RESTful Environments (CoRE) Link Format
Abstract
This specification defines Web Linking using a link format for use by
constrained web servers to describe hosted resources, their
attributes, and other relationships between links. Based on the HTTP
Link Header field defined in RFC 5988, the Constrained RESTful
Environments (CoRE) Link Format is carried as a payload and is
assigned an Internet media type. "RESTful" refers to the
Representational State Transfer (REST) architecture. A well-known
URI is defined as a default entry point for requesting the links
hosted by a server.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6690.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Shelby Standards Track [Page 1]
RFC 6690 CoRE Link Format August 2012
Table of Contents
1. Introduction ....................................................3
1.1. Web Linking in CoRE ........................................3
1.2. Use Cases ..................................................4
1.2.1. Discovery ...........................................4
1.2.2. Resource Collections ................................5
1.2.3. Resource Directory ..................................5
1.3. Terminology ................................................6
2. Link Format .....................................................6
2.1. Target and Context URIs ....................................8
2.2. Link Relations .............................................8
2.3. Use of Anchors .............................................9
3. CoRE Link Attributes ............................................9
3.1. Resource Type 'rt' Attribute ...............................9
3.2. Interface Description 'if' Attribute ......................10
3.3. Maximum Size Estimate 'sz' Attribute ......................10
4. Well-Known Interface ...........................................10
4.1. Query Filtering ...........................................12
5. Examples .......................................................13
6. Security Considerations ........................................15
7. IANA Considerations ............................................16
7.1. Well-Known 'core' URI .....................................16
7.2. New 'hosts' Relation Type .................................16
7.3. New 'link-format' Internet Media Type .....................17
7.4. Constrained RESTful Environments (CoRE) Parameters
Registry ..................................................18
8. Acknowledgments ................................................19
9. References .....................................................20
9.1. Normative References ......................................20
9.2. Informative References ....................................20
Shelby Standards Track [Page 2]
RFC 6690 CoRE Link Format August 2012
1. Introduction
The Constrained RESTful Environments (CoRE) realizes the
Representational State Transfer (REST) architecture [REST] in a
suitable form for the most constrained nodes (e.g., 8-bit
microcontrollers with limited memory) and networks (e.g., IPv6 over
Low-Power Wireless Personal Area Networks (6LoWPANs) [RFC4919]).
CoRE is aimed at Machine-to-Machine (M2M) applications such as smart
energy and building automation.
The discovery of resources hosted by a constrained server is very
important in machine-to-machine applications where there are no
humans in the loop and static interfaces result in fragility. The
discovery of resources provided by an HTTP [RFC2616] web server is
typically called "Web Discovery" and the description of relations
between resources is called "Web Linking" [RFC5988]. In the present
specification, we refer to the discovery of resources hosted by a
constrained web server, their attributes, and other resource
relations as CoRE Resource Discovery.
The main function of such a discovery mechanism is to provide
Universal Resource Identifiers (URIs, called links) for the resources
hosted by the server, complemented by attributes about those
resources and possible further link relations. In CoRE, this
collection of links is carried as a resource of its own (as opposed
to HTTP headers delivered with a specific resource). This document
specifies a link format for use in CoRE Resource Discovery by
extending the HTTP Link Header format [RFC5988] to describe these
link descriptions. The CoRE Link Format is carried as a payload and
is assigned an Internet media type. A well-known relative URI
"/.well-known/core" is defined as a default entry point for
requesting the list of links about resources hosted by a server and
thus performing CoRE Resource Discovery. This specification is
applicable for use with Constrained Application Protocol (CoAP)
[COAP], HTTP, or any other suitable web transfer protocol. The link
format can also be saved in file format.
1.1. Web Linking in CoRE
Technically, the CoRE Link Format is a serialization of a typed link
as specified in [RFC5988], used to describe relationships between
resources, so-called "Web Linking". In this specification, Web
Linking is extended with specific constrained M2M attributes; links
are carried as a message payload rather than in an HTTP Link Header
field, and a default interface is defined to discover resources
hosted by a server. This specification also defines a new relation
Shelby Standards Track [Page 3]
RFC 6690 CoRE Link Format August 2012
type "hosts" (from the verb "to host"), which indicates that the
resource is hosted by the server from which the link document was
requested.
In HTTP, the Link Header can be used to carry link information about
a resource along with an HTTP response. This works well for the
typical use case for a web server and browser, where further
information about a particular resource is useful after accessing it.
In CoRE, the main use case for Web Linking is the discovery of which
resources a server hosts in the first place. Although some resources
may have further links associated with them, this is expected to be
an exception. For that reason, the CoRE Link Format serialization is
carried as a resource representation of a well-known URI. The CoRE
Link Format does reuse the format of the HTTP Link Header
serialization defined in [RFC5988].
1.2. Use Cases
Typical use cases for Web Linking on today's web include, e.g.,
describing the author of a web page or describing relations between
web pages (next chapter, previous chapter, etc.). Web Linking can
also be applied to M2M applications, where typed links are used to
assist a machine client in finding and understanding how to use
resources on a server. In this section a few use cases are described
for how the CoRE Link Format could be used in M2M applications. For
further technical examples, see Section 5. As there is a large range
of M2M applications, these use cases are purposely generic. This
specification assumes that different deployments or application
domains will define the appropriate REST Interface Descriptions along
with Resource Types to make discovery meaningful.
1.2.1. Discovery
In M2M applications, for example, home or building automation, there
is a need for local clients and servers to find and interact with
each other without human intervention. The CoRE Link Format can be
used by servers in such environments to enable Resource Discovery of
the resources hosted by the server.
Resource Discovery can be performed either unicast or multicast.
When a server's IP address is already known, either a priori or
resolved via the Domain Name System (DNS) [RFC1034][RFC1035], unicast
discovery is performed in order to locate the entry point to the
resource of interest. In this specification, this is performed using
a GET to "/.well-known/core" on the server, which returns a payload
in the CoRE Link Format. A client would then match the appropriate
Resource Type, Interface Description, and possible media type
Shelby Standards Track [Page 4]
RFC 6690 CoRE Link Format August 2012
[RFC2045] for its application. These attributes may also be included
in the query string in order to filter the number of links returned
in a response.
Multicast Resource Discovery is useful when a client needs to locate
a resource within a limited scope, and that scope supports IP
multicast. A GET request to the appropriate multicast address is
made for "/.well-known/core". In order to limit the number and size
of responses, a query string is recommended with the known
attributes. Typically, a resource would be discovered based on its
Resource Type and/or Interface Description, along with possible
application-specific attributes.
1.2.2. Resource Collections
RESTful designs of M2M interfaces often make use of collections of
resources. For example, an index of temperature sensors on a data
collection node or a list of alarms on a home security controller.
The CoRE Link Format can be used to make it possible to find the
entry point to a collection and traverse its members. The entry
point of a collection would always be included in "/.well-known/core"
to enable its discovery. The members of the collection can be
defined either through the Interface Description of the resource
along with a parameter resource for the size of the collection or by
using the link format to describe each resource in the collection.
These links could be located under "/.well-known/core" or hosted, for
example, in the root resource of the collection.
1.2.3. Resource Directory
In many deployment scenarios, for example, constrained networks with
sleeping servers or large M2M deployments with bandwidth limited
access networks, it makes sense to deploy resource directory entities
that store links to resources stored on other servers. Think of this
as a limited search engine for constrained M2M resources.
The CoRE Link Format can be used by a server to register resources
with a resource directory or to allow a resource directory to poll
for resources. Resource registration can be achieved by having each
server POST their resources to "/.well-known/core" on the resource
directory. This, in turn, adds links to the resource directory under
an appropriate resource. These links can then be discovered by any
client by making a request to a resource directory lookup interface.
Shelby Standards Track [Page 5]
RFC 6690 CoRE Link Format August 2012
1.3. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
specification are to be interpreted as described in [RFC2119].
This specification makes use of the Augmented Backus-Naur Form (ABNF)
[RFC5234] notation, including the core rules defined in Appendix B of
that document.
This specification requires readers to be familiar with all the terms
and concepts that are discussed in [RFC5988] and [RFC6454]. In
addition, this specification makes use of the following terminology:
Web Linking
A framework for indicating the relationships between web
resources.
Link
Also called "typed links" in [RFC5988]. A link is a typed
connection between two resources identified by URI and is made up
of a context URI, a link relation type, a target URI, and optional
target attributes.
Link Format
A particular serialization of typed links.
CoRE Link Format
A particular serialization of typed links based on the HTTP Link
Header field serialization defined in Section 5 of [RFC5988] but
carried as a resource representation with a media type.
Attribute
Properly called "Target Attribute" in [RFC5988]. A key/value pair
that describes the link or its target.
CoRE Resource Discovery
When a client discovers the list of resources hosted by a server,
their attributes, and other link relations by accessing
"/.well-known/core".
2. Link Format
The CoRE Link Format extends the HTTP Link Header field specified in
[RFC5988]. The format does not require special XML or binary
parsing, is fairly compact, and is extensible -- all important
characteristics for CoRE. It should be noted that this link format
is just one serialization of typed links defined in [RFC5988]; others
Shelby Standards Track [Page 6]
RFC 6690 CoRE Link Format August 2012
include HTML links, Atom feed links [RFC4287], or HTTP Link Header
fields. It is expected that resources discovered in the CoRE Link
Format may also be made available in alternative formats on the
greater Internet. The CoRE Link Format is only expected to be
supported in constrained networks and M2M systems.
Section 5 of [RFC5988] did not require an Internet media type for the
defined link format, as it was defined to be carried in an HTTP
header. This specification thus defines the Internet media type
'application/link-format' for the CoRE Link Format (see Section 7.3).
Whereas the HTTP Link Header field depends on [RFC2616] for its
encoding, the CoRE Link Format is encoded as UTF-8 [RFC3629]. A
decoder of the format is not expected to validate UTF-8 encoding (but
is not prohibited from doing so) and doesn't need to perform any
UTF-8 normalization. UTF-8 data can be compared bitwise, which
allows values to contain UTF-8 data without any added complexity for
constrained nodes.
The CoRE Link Format is equivalent to the [RFC5988] link format;
however, the ABNF in the present specification is repeated with
improvements to be compliant with [RFC5234] and includes new link
parameters. The link parameter "href" is reserved for use as a query
parameter for filtering in this specification (see Section 4.1) and
MUST NOT be defined as a link parameter. As in [RFC5988], multiple
link descriptions are separated by commas. Note that commas can also
occur in quoted strings and URIs but do not end a description. In
order to convert an HTTP Link Header field to this link format, first
the "Link:" HTTP header is removed, any linear whitespace (LWS) is
removed, the header value is converted to UTF-8, and any percent-
encodings are decoded.
Link = link-value-list
link-value-list = [ link-value *[ "," link-value ]]
link-value = "<" URI-Reference ">" *( ";" link-param )
link-param = ( ( "rel" "=" relation-types )
/ ( "anchor" "=" DQUOTE URI-Reference DQUOTE )
/ ( "rev" "=" relation-types )
/ ( "hreflang" "=" Language-Tag )
/ ( "media" "=" ( MediaDesc
/ ( DQUOTE MediaDesc DQUOTE ) ) )
/ ( "title" "=" quoted-string )
/ ( "title*" "=" ext-value )
/ ( "type" "=" ( media-type / quoted-mt ) )
/ ( "rt" "=" relation-types )
/ ( "if" "=" relation-types )
/ ( "sz" "=" cardinal )
/ ( link-extension ) )
link-extension = ( parmname [ "=" ( ptoken / quoted-string ) ] )
Shelby Standards Track [Page 7]
RFC 6690 CoRE Link Format August 2012
/ ( ext-name-star "=" ext-value )
ext-name-star = parmname "*" ; reserved for RFC-2231-profiled
; extensions. Whitespace NOT
; allowed in between.
ptoken = 1*ptokenchar
ptokenchar = "!" / "#" / "$" / "%" / "&" / "'" / "("
/ ")" / "*" / "+" / "-" / "." / "/" / DIGIT
/ ":" / "<" / "=" / ">" / "?" / "@" / ALPHA
/ "[" / "]" / "^" / "_" / "`" / "{" / "|"
/ "}" / "~"
media-type = type-name "/" subtype-name
quoted-mt = DQUOTE media-type DQUOTE
relation-types = relation-type
/ DQUOTE relation-type *( 1*SP relation-type ) DQUOTE
relation-type = reg-rel-type / ext-rel-type
reg-rel-type = LOALPHA *( LOALPHA / DIGIT / "." / "-" )
ext-rel-type = URI
cardinal = "0" / ( %x31-39 *DIGIT )
LOALPHA = %x61-7A ; a-z
quoted-string = <defined in [RFC2616]>
URI = <defined in [RFC3986]>
URI-Reference = <defined in [RFC3986]>
type-name = <defined in [RFC4288]>
subtype-name = <defined in [RFC4288]>
MediaDesc = <defined in [W3C.HTML.4.01]>
Language-Tag = <defined in [RFC5646]>
ext-value = <defined in [RFC5987]>
parmname = <defined in [RFC5987]>
2.1. Target and Context URIs
Each link conveys one target URI as a URI-reference inside angle
brackets ("<>"). The context URI of a link (also called the base URI
in [RFC3986]) is determined by the following rules in this
specification:
(a) The context URI is set to the anchor parameter, when specified.
(b) Origin of the target URI, when specified.
(c) Origin of the link format resource's base URI.
2.2. Link Relations
Since links in the CoRE Link Format are typically used to describe
resources hosted by a server, the new relation type "hosts" is
assumed in the absence of the relation parameter (see Section 7.2).
The "hosts" relation type (from the verb "to host") indicates that
Shelby Standards Track [Page 8]
RFC 6690 CoRE Link Format August 2012
the target URI is a resource hosted by the server (i.e., server hosts
resource) indicated by the context URI. The target URI MUST be a
relative URI of the context URI for this relation type.
To express other relations, links can make use of any registered
relation by including the relation parameter. The context of a
relation can be defined using the anchor parameter. In this way,
relations between resources hosted on a server or between hosted
resources and external resources can be expressed.
2.3. Use of Anchors
As per Section 5.2 of [RFC5988], a link description MAY include an
"anchor" parameter, in which case the context is the URI included in
that attribute. This is used to describe a relationship between two
resources. A consuming implementation can, however, choose to ignore
such links. It is not expected that all implementations will be able
to derive useful information from explicitly anchored links.
3. CoRE Link Attributes
The following CoRE-specific target attributes are defined in addition
to those already defined in [RFC5988]. These attributes describe
information useful in accessing the target link of the relation and,
in some cases, can use the syntactical form of a URI. Such a URI MAY
be dereferenced (for instance, to obtain a description of the link
relation), but that is not part of the protocol and MUST NOT be done
automatically on link evaluation. When the values of attributes are
compared, they MUST be compared as strings.
3.1. Resource Type 'rt' Attribute
The Resource Type 'rt' attribute is an opaque string used to assign
an application-specific semantic type to a resource. One can think
of this as a noun describing the resource. In the case of a
temperature resource, this could be, e.g., an application-specific
semantic type like "outdoor-temperature" or a URI referencing a
specific concept in an ontology like
"http://sweet.jpl.nasa.gov/2.0/phys.owl#Temperature". Multiple
Resource Types MAY be included in the value of this parameter, each
separated by a space, similar to the relation attribute. The
registry for Resource Type values is defined in Section 7.4.
The Resource Type attribute is not meant to be used to assign a
human-readable name to a resource. The "title" attribute defined in
[RFC5988] is meant for that purpose. The Resource Type attribute
MUST NOT appear more than once in a link.
Shelby Standards Track [Page 9]
RFC 6690 CoRE Link Format August 2012
3.2. Interface Description 'if' Attribute
The Interface Description 'if' attribute is an opaque string used to
provide a name or URI indicating a specific interface definition used
to interact with the target resource. One can think of this as
describing verbs usable on a resource. The Interface Description
attribute is meant to describe the generic REST interface to interact
with a resource or a set of resources. It is expected that an
Interface Description will be reused by different Resource Types.
For example, the Resource Types "outdoor-temperature", "dew-point",
and "rel-humidity" could all be accessible using the Interface
Description "http://www.example.org/myapp.wadl#sensor". Multiple
Interface Descriptions MAY be included in the value of this
parameter, each separated by a space, similar to the relation
attribute. The registry for Interface Description values is defined
in Section 7.4.
The Interface Description could be, for example, the URI of a Web
Application Description Language (WADL) [WADL] definition of the
target resource "http://www.example.org/myapp.wadl#sensor", a URN
indicating the type of interface to the resource "urn:myapp:sensor",
or an application-specific name "sensor". The Interface Description
attribute MUST NOT appear more than once in a link.
3.3. Maximum Size Estimate 'sz' Attribute
The maximum size estimate attribute 'sz' gives an indication of the
maximum size of the resource representation returned by performing a
GET on the target URI. For links to CoAP resources, this attribute
is not expected to be included for small resources that can
comfortably be carried in a single Maximum Transmission Unit (MTU)
but SHOULD be included for resources larger than that. The maximum
size estimate attribute MUST NOT appear more than once in a link.
Note that there is no defined upper limit to the value of the 'sz'
attributes. Implementations MUST be prepared to accept large values.
One implementation strategy is to convert any value larger than a
reasonable size limit for this implementation to a special value
"Big", which in further processing would indicate that a size value
was given that was so big that it cannot be processed by this
implementation.
4. Well-Known Interface
Resource discovery in CoRE is accomplished through the use of a well-
known resource URI that returns a list of links about resources
hosted by that server and other link relations. Well-known resources
Shelby Standards Track [Page 10]
RFC 6690 CoRE Link Format August 2012
have a path component that begins with "/.well-known/" as specified
in [RFC5785]. This specification defines a new well-known resource
for CoRE Resource Discovery: "/.well-known/core".
A server implementing this specification MUST support this resource
on the default port appropriate for the protocol for the purpose of
resource discovery. It is, however, up to the application which
links are included and how they are organized. The resource
"/.well-known/core" is meant to be used to return links to the entry
points of resource interfaces on a server. More sophisticated link
organization can be achieved by including links to CoRE Link Format
resources located elsewhere on the server, for example, to achieve an
index. In the absence of any links, a zero-length payload is
returned. The resource representation of this resource MUST be the
CoRE Link Format described in Section 2.
The CoRE resource discovery interface supports the following
interactions:
o Performing a GET on "/.well-known/core" to the default port
returns a set of links available from the server (if any) in the
CoRE Link Format. These links might describe resources hosted on
that server or on other servers or express other kinds of link
relations as described in Section 2.
o Filtering may be performed on any of the link format attributes
using a query string as specified in Section 4.1. For example,
[GET /.well-known/core?rt=temperature-c] would request resources
with the Resource Type temperature-c. A server is not, however,
required to support filtering.
o More capable servers such as proxies could support a resource
directory by requesting the resource descriptions of other end-
points or allowing servers to POST requests to "/.well-known/
core". The details of such resource directory functionality is,
however, out of the scope of this specification and is expected to
be specified separately.
Shelby Standards Track [Page 11]
RFC 6690 CoRE Link Format August 2012
4.1. Query Filtering
A server implementing this specification MAY recognize the query part
of a resource discovery URI as a filter on the resources to be
returned. The path and query components together should conform to
the following level-4 URI Template [RFC6570]:
/.well-known/core{?search*}
where the variable "search" is a 1-element list that has a single
name/value pair, where
o name is either "href", a link-param name defined in this
specification, or any other link-extension name, and
o value is either a Complete Value String that does not end in an
"*" (%2A), or a Prefix Value String followed by an "*" (%2A).
The search name "href" refers to the URI-reference between the "<"
and ">" characters of a link. Both Value Strings match a target
attribute only if it exists. Value Strings are percent-decoded
([RFC3986], Section 2.1) before matching; similarly, any target
attributes notated as quoted-string are interpreted as defined in
Section 2.2 of [RFC2616]. After these steps, a Complete Value String
matches a target attribute if it is bitwise identical. A Prefix
Value String matches a target attribute if it is a bitwise prefix of
the target attribute (where any string is a prefix of itself). Empty
Prefix Value Strings are allowed; by the definition above, they match
any target attribute that does exist. Note that relation-type target
attributes can contain multiple values, and each value MUST be
treated as a separate target attribute when matching.
It is not expected that very constrained nodes support filtering.
Implementations not supporting filtering MUST simply ignore the query
string and return the whole resource for unicast requests.
When using a transfer protocol like the Constrained Application
Protocol (CoAP) that supports multicast requests, special care needs
to be taken. A multicast request with a query string SHOULD NOT be
responded to if filtering is not supported or if the filter does not
match (to avoid a needless response storm). The exception is in
cases where the IP stack interface is not able to indicate that the
destination address was multicast.
Shelby Standards Track [Page 12]
RFC 6690 CoRE Link Format August 2012
The following are examples of valid query URIs:
o ?href=/foo matches a link-value that is anchored at /foo
o ?href=/foo* matches a link-value that is anchored at a URI that
starts with /foo
o ?foo=bar matches a link-value that has a target attribute named
foo with the exact value bar
o ?foo=bar* matches a link-value that has a target attribute named
foo, the value of which starts with bar, e.g., bar or barley
o ?foo=* matches a link-value that has a target attribute named foo
5. Examples
A few examples of typical link descriptions in this format follows.
Multiple resource descriptions in a representation are separated by
commas. Linefeeds are also included in these examples for
readability. Although the following examples use CoAP response
codes, the examples are applicable to HTTP as well (the corresponding
response code would be 200 OK).
This example includes links to two different sensors sharing the same
Interface Description. Note that the default relation type for this
link format is "hosts" in links with no rel= target attribute. Thus,
the links in this example tell that the Origin server from which
/.well-known/core was requested (the context) hosts the resources
/sensors/temp and /sensors/light (each a target).
REQ: GET /.well-known/core
RES: 2.05 Content
</sensors/temp>;if="sensor",
</sensors/light>;if="sensor"
Without the linefeeds inserted here for readability, the format
actually looks as follows.
</sensors/temp>;if="sensor",</sensors/light>;if="sensor"
This example arranges link descriptions hierarchically, with the
entry point including a link to a sub-resource containing links about
the sensors.
Shelby Standards Track [Page 13]
RFC 6690 CoRE Link Format August 2012
REQ: GET /.well-known/core
RES: 2.05 Content
</sensors>;ct=40
REQ: GET /sensors
RES: 2.05 Content
</sensors/temp>;rt="temperature-c";if="sensor",
</sensors/light>;rt="light-lux";if="sensor"
An example query filter may look like:
REQ: GET /.well-known/core?rt=light-lux
RES: 2.05 Content
</sensors/light>;rt="light-lux";if="sensor"
Note that relation-type attributes like 'rt', 'if', and 'rel' can
have multiple values separated by spaces. A query filter parameter
can match any one of those values, as in this example:
REQ: GET /.well-known/core?rt=light-lux
RES: 2.05 Content
</sensors/light>;rt="light-lux core.sen-light";if="sensor"
This example shows the use of an "anchor" attribute to relate the
temperature sensor resource to an external description and to an
alternative URI.
REQ: GET /.well-known/core
RES: 2.05 Content
</sensors>;ct=40;title="Sensor Index",
</sensors/temp>;rt="temperature-c";if="sensor",
</sensors/light>;rt="light-lux";if="sensor",
<http://www.example.com/sensors/t123>;anchor="/sensors/temp"
;rel="describedby",
</t>;anchor="/sensors/temp";rel="alternate"
Shelby Standards Track [Page 14]
RFC 6690 CoRE Link Format August 2012
If a client is interested in finding relations about a particular
resource, it can perform a query on the anchor parameter:
REQ: GET /.well-known/core?anchor=/sensors/temp
RES: 2.05 Content
<http://www.example.com/sensors/temp123>;anchor="/sensors/temp"
;rel="describedby",
</t>;anchor="/sensors/temp";rel="alternate"
The following example shows a large firmware resource with a size
attribute. The consumer of this link would use the 'sz' attribute to
determine if the resource representation is too large and if block
transfer would be required to request it. In this case, a client
with only a 64 KiB flash might only support a 16-bit integer for
storing the 'sz' attribute. Thus, a special flag or value should be
used to indicate "Big" (larger than 64 KiB).
REQ: GET /.well-known/core?rt=firmware
RES: 2.05 Content
</firmware/v2.1>;rt="firmware";sz=262144
6. Security Considerations
This specification has the same security considerations as described
in Section 7 of [RFC5988]. The "/.well-known/core" resource MAY be
protected, e.g., using Datagram Transport Layer Security (DTLS) when
hosted on a CoAP server as per [COAP], Section 9.1.
Some servers might provide resource discovery services to a mix of
clients that are trusted to different levels. For example, a
lighting control system might allow any client to read state
variables, but only certain clients to write state (turn lights on or
off). Servers that have authentication and authorization features
SHOULD support authentication features of the underlying transport
protocols (HTTP or DTLS/TLS) and allow servers to return different
lists of links based on a client's identity and authorization. While
such servers might not return all links to all requesters, not
providing the link does not, by itself, control access to the
relevant resource -- a bad actor could know or guess the right URIs.
Servers can also lie about the resources available. If it is
important for a client to only get information from a known source,
then that source needs to be authenticated.
Shelby Standards Track [Page 15]
RFC 6690 CoRE Link Format August 2012
Multicast requests using CoAP for the well-known link-format
resources could be used to perform denial of service on a constrained
network. A multicast request SHOULD only be accepted if the request
is sufficiently authenticated and secured using, e.g., IPsec or an
appropriate object security mechanism.
CoRE Link Format parsers should be aware that a link description may
be cyclical, i.e., contain a link to itself. These cyclical links
could be direct or indirect (i.e., through referenced link
resources). Care should be taken when parsing link descriptions and
accessing cyclical links.
7. IANA Considerations
7.1. Well-Known 'core' URI
This memo registers the 'core' well-known URI in the Well-Known URIs
registry as defined by [RFC5785].
URI suffix: core
Change controller: IETF
Specification document(s): RFC 6690
Related information: None
7.2. New 'hosts' Relation Type
This memo registers the new "hosts" Web Linking relation type as per
[RFC5988].
Relation Name: hosts
Description: Refers to a resource hosted by the server indicated by
the link context.
Reference: RFC 6690
Notes: This relation is used in CoRE where links are retrieved as a
"/.well-known/core" resource representation and is the default
relation type in the CoRE Link Format.
Application Data: None
Shelby Standards Track [Page 16]
RFC 6690 CoRE Link Format August 2012
7.3. New 'link-format' Internet Media Type
This memo registers the a new Internet media type for the CoRE Link
Format, 'application/link-format'.
Type name: application
Subtype name: link-format
Required parameters: None
Optional parameters: None
Encoding considerations: Binary data (UTF-8)
Security considerations:
Multicast requests using CoAP for the well-known link-format
resources could be used to perform denial of service on a constrained
network. A multicast request SHOULD only be accepted if the request
is sufficiently authenticated and secured using, e.g., IPsec or an
appropriate object security mechanism.
CoRE Link Format parsers should be aware that a link description may
be cyclical, i.e., contain a link to itself. These cyclical links
could be direct or indirect (i.e., through referenced link
resources). Care should be taken when parsing link descriptions and
accessing cyclical links.
Interoperability considerations: None
Published specification: RFC 6690
Applications that use this media type: CoAP server and client
implementations for resource discovery and HTTP applications that use
the link-format as a payload.
Additional information:
Magic number(s):
File extension(s): *.wlnk
Macintosh file type code(s):
Intended usage: COMMON
Restrictions on usage: None
Shelby Standards Track [Page 17]
RFC 6690 CoRE Link Format August 2012
Author: CoRE WG
Change controller: IETF
7.4. Constrained RESTful Environments (CoRE) Parameters Registry
This specification establishes a new Constrained RESTful Environments
(CoRE) Parameters registry, which contains two new sub-registries of
Link Target Attribute values (defined in [RFC5988]), one for Resource
Type (rt=) Link Target Attribute values and the other for Interface
Description (if=) Link Target Attribute values. No initial entries
are defined by this specification for either sub-registry.
For both sub-registries, values starting with the characters "core"
are registered using the IETF Review registration policy [RFC5226].
All other values are registered using the Specification Required
policy, which requires review by a designated expert appointed by the
IESG or their delegate.
The designated expert will enforce the following requirements:
o Registration values MUST be related to the intended purpose of
these attributes as described in Section 3.
o Registered values MUST conform to the ABNF reg-rel-type definition
of Section 2, meaning that the value starts with a lowercase
alphabetic character, followed by a sequence of lowercase
alphabetic, numeric, ".", or "-" characters, and contains no white
space.
o It is recommended that the period "." character be used for
dividing name segments and that the dash "-" character be used for
making a segment more readable. Example Interface Description
values might be "core.batch" and "core.link-batch".
o URIs are reserved for free use as extension values for these
attributes and MUST NOT be registered.
Registration requests consist of the completed registration template
below, with the reference pointing to the required specification. To
allow for the allocation of values prior to publication, the
designated expert may approve registration once they are satisfied
that a specification will be published.
Note that Link Target Attribute Values can be registered by third
parties if the Designated Expert determines that an unregistered Link
Target Attribute Value is widely deployed and not likely to be
registered in a timely manner.
Shelby Standards Track [Page 18]
RFC 6690 CoRE Link Format August 2012
The registration template for both sub-registries is:
o Attribute Value:
o Description:
o Reference:
o Notes: [optional]
Registration requests should be sent to the core-parameters@ietf.org
mailing list, marked clearly in the subject line (e.g., "NEW RESOURCE
TYPE - example" to register an "example" relation type or "NEW
INTERFACE DESCRIPTION - example" to register an "example" Interface
Description).
Within at most 14 days of the request, the Designated Expert(s) will
either approve or deny the registration request, communicating this
decision to the review list and IANA. Denials should include an
explanation and, if applicable, suggestions as to how to make the
request successful.
Decisions (or lack thereof) made by the Designated Expert can be
first appealed to Application Area Directors (contactable using the
app-ads@tools.ietf.org email address or directly by looking up their
email addresses on http://www.iesg.org/ website) and, if the
appellant is not satisfied with the response, to the full IESG (using
the iesg@ietf.org mailing list).
8. Acknowledgments
Special thanks to Peter Bigot, who has made a considerable number of
reviews and text contributions that greatly improved the document.
In particular, Peter is responsible for early improvements to the
ABNF descriptions and the idea for a new 'hosts' relation type.
Thanks to Mark Nottingham and Eran Hammer-Lahav for the discussions
and ideas that led to this document, and to Carsten Bormann, Martin
Thomson, Alexey Melnikov, Julian Reschke, Joel Halpern, Richard
Barnes, Barry Leiba, and Peter Saint-Andre for extensive comments and
contributions that improved the text.
Thanks to Michael Stuber, Richard Kelsey, Cullen Jennings, Guido
Moritz, Peter Van Der Stok, Adriano Pezzuto, Lisa Dussealt, Alexey
Melnikov, Gilbert Clark, Salvatore Loreto, Petri Mutka, Szymon Sasin,
Robert Quattlebaum, Robert Cragie, Angelo Castellani, Tom Herbst, Ed
Beroset, Gilman Tolle, Robby Simpson, Colin O'Flynn, and David Ryan
for helpful comments and discussions that have shaped the document.
Shelby Standards Track [Page 19]
RFC 6690 CoRE Link Format August 2012
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, January 2005.
[RFC4288] Freed, N. and J. Klensin, "Media Type Specifications and
Registration Procedures", BCP 13, RFC 4288, December 2005.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
[RFC5646] Phillips, A. and M. Davis, "Tags for Identifying
Languages", BCP 47, RFC 5646, September 2009.
[RFC5987] Reschke, J., "Character Set and Language Encoding for
Hypertext Transfer Protocol (HTTP) Header Field
Parameters", RFC 5987, August 2010.
[RFC5988] Nottingham, M., "Web Linking", RFC 5988, October 2010.
[RFC6570] Gregorio, J., Fielding, R., Hadley, M., Nottingham, M.,
and D. Orchard, "URI Template", RFC 6570, March 2012.
9.2. Informative References
[COAP] Shelby, Z., Hartke, K., Bormann, C., and B. Frank,
"Constrained Application Protocol (CoAP)", Work in
Progress, July 2012.
Shelby Standards Track [Page 20]
RFC 6690 CoRE Link Format August 2012
[REST] Fielding, R., "Architectural Styles and the Design of
Network-based Software Architectures", 2000,
<http://www.ics.uci.edu/~fielding/pubs/dissertation/
top.htm>.
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, November 1987.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, November 1987.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, November 1996.
[RFC2231] Freed, N. and K. Moore, "MIME Parameter Value and Encoded
Word Extensions: Character Sets, Languages, and
Continuations", RFC 2231, November 1997.
[RFC4287] Nottingham, M., Ed. and R. Sayre, Ed., "The Atom
Syndication Format", RFC 4287, December 2005.
[RFC4919] Kushalnagar, N., Montenegro, G., and C. Schumacher, "IPv6
over Low-Power Wireless Personal Area Networks (6LoWPANs):
Overview, Assumptions, Problem Statement, and Goals",
RFC 4919, August 2007.
[RFC5785] Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known
Uniform Resource Identifiers (URIs)", RFC 5785,
April 2010.
[RFC6454] Barth, A., "The Web Origin Concept", RFC 6454,
December 2011.
[W3C.HTML.4.01]
Raggett, D., Le Hors, A., and I. Jacobs, "HTML 4.01
Specification", World Wide Web Consortium
Recommendation REC-html401-19991224, December 1999,
<http://www.w3.org/TR/1999/REC-html401-19991224>.
[WADL] Hadley, M., "Web Application Description Language (WADL)",
2009, <http://java.net/projects/wadl/sources/svn/content/
trunk/www/wadl20090202.pdf>.
Shelby Standards Track [Page 21]
RFC 6690 CoRE Link Format August 2012
Author's Address
Zach Shelby
Sensinode
Kidekuja 2
Vuokatti 88600
Finland
Phone: +358407796297
EMail: zach@sensinode.com
Shelby Standards Track [Page 22]