<- RFC Index (8501..8600)
RFC 8561
Internet Engineering Task Force (IETF) J. Ahlberg
Request for Comments: 8561 Ericsson AB
Category: Standards Track M. Ye
ISSN: 2070-1721 Huawei Technologies
X. Li
NEC Laboratories Europe
D. Spreafico
Nokia - IT
M. Vaupotic
Aviat Networks
June 2019
A YANG Data Model for Microwave Radio Link
Abstract
This document defines a YANG data model for control and management of
radio link interfaces and their connectivity to packet (typically
Ethernet) interfaces in a microwave/millimeter wave node. The data
nodes for management of the interface protection functionality is
broken out into a separate and generic YANG data model in order to
make it available for other interface types as well.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8561.
Ahlberg, et al. Standards Track [Page 1]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Terminology and Definitions . . . . . . . . . . . . . . . 3
1.2. Tree Structure . . . . . . . . . . . . . . . . . . . . . 5
2. Microwave Radio Link YANG Data Model . . . . . . . . . . . . 5
2.1. YANG Tree . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2. Explanation of the Microwave Data Model . . . . . . . . . 7
3. Microwave Radio Link YANG Data Model . . . . . . . . . . . . 7
4. Interface Protection YANG Data Model . . . . . . . . . . . . 27
5. Microwave Types YANG Data Model . . . . . . . . . . . . . . . 33
6. Security Considerations . . . . . . . . . . . . . . . . . . . 40
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 42
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 43
8.1. Normative References . . . . . . . . . . . . . . . . . . 43
8.2. Informative References . . . . . . . . . . . . . . . . . 44
Appendix A. Example: 1+0 and 2+0 Configuration Instances . . . . 47
A.1. 1+0 Instance . . . . . . . . . . . . . . . . . . . . . . 47
A.2. 2+0 Instance . . . . . . . . . . . . . . . . . . . . . . 49
A.3. 2+0 XPIC Instance . . . . . . . . . . . . . . . . . . . . 50
Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 53
Ahlberg, et al. Standards Track [Page 2]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
1. Introduction
This document defines a YANG data model for management and control of
the radio link interface(s) and the relationship to packet (typically
Ethernet) and/or Time-Division Multiplexing (TDM) interfaces in a
microwave/millimeter wave node. The ETSI EN 302 217 series defines
the characteristics and requirements of microwave/millimeter wave
equipment and antennas. Specifically, ETSI EN 302 217-2 [EN302217-2]
specifies the essential parameters for systems operating from 1.4 GHz
to 86 GHz. The data model includes configuration and state data
according to the new Network Management Datastore Architecture
[RFC8342].
The design of the data model follows the framework for management and
control of microwave and millimeter wave interface parameters defined
in [RFC8432]. This framework identifies the need and the scope of
the YANG data model, use cases, and requirements that the model needs
to support. Moreover, it provides a detailed gap analysis to
identify the missing parameters and functionalities of the existing
and established models to support the specified use cases and
requirements, and based on that, it recommends how the gaps should be
filled with the development of the new model. According to the
conclusion of the gap analysis, the structure of the data model is
based on the structure defined in [MICROWAVE-RADIO-LINK], and it
augments [RFC8343] to align with the same structure for management of
the packet interfaces. More specifically, the model will include
interface layering to manage the capacity provided by a radio link
terminal for the associated Ethernet and TDM interfaces, using the
principles for interface layering described in [RFC8343] as a basis.
The data nodes for management of the interface protection
functionality is broken out into a separate and generic YANG data
module in order to make it also available for other interface types.
The designed YANG data model uses established microwave equipment and
radio standards, such as ETSI EN 302 217-2; the IETF Radio Link Model
[MICROWAVE-RADIO-LINK]; and the ONF Microwave Model [ONF-model], as
the basis for the definition of the detailed leafs/parameters, and it
proposes new ones to cover identified gaps, which are analyzed in
[RFC8432].
1.1. Terminology and Definitions
The following terms are used in this document:
Carrier Termination (CT) is an interface for the capacity provided
over the air by a single carrier. It is typically defined by its
transmitting and receiving frequencies.
Ahlberg, et al. Standards Track [Page 3]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Radio Link Terminal (RLT) is an interface providing packet capacity
and/or TDM capacity to the associated Ethernet and/or TDM interfaces
in a node and is used for setting up a transport service over a
microwave/millimeter wave link.
The following acronyms are used in this document:
ACM: Adaptive Coding Modulation
ATPC: Automatic Transmitter Power Control
BBE: Background Block Error
BER: Bit Error Ratio
BPSK: Binary Phase-Shift Keying
CM: Coding Modulation
CT: Carrier Termination
ES: Errored Seconds
IF: Intermediate Frequency
MIMO: Multiple Input Multiple Output
RF: Radio Frequency
RLT: Radio Link Terminal
QAM: Quadrature Amplitude Modulation
QPSK: Quadrature Phase-Shift Keying
RTPC: Remote Transmit Power Control
SES: Severely Errored Seconds
TDM: Time-Division Multiplexing
UAS: Unavailable Seconds
XPIC: Cross Polarization Interference Cancellation
Ahlberg, et al. Standards Track [Page 4]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
1.2. Tree Structure
A simplified graphical representation of the data model is used in
Section 2.1 of this document. The meaning of the symbols in these
diagrams is defined in [RFC8340].
2. Microwave Radio Link YANG Data Model
2.1. YANG Tree
module: ietf-microwave-radio-link
+--rw radio-link-protection-groups
| +--rw protection-group* [name]
| +--rw name string
| +--rw protection-architecture-type? identityref
| +--rw members* if:interface-ref
| +--rw operation-type? enumeration
| +--rw working-entity* if:interface-ref
| +--rw revertive-wait-to-restore? uint16
| +--rw hold-off-timer? uint16
| +--ro status? identityref
| +---x manual-switch-working
| +---x manual-switch-protection
| +---x forced-switch
| +---x lockout-of-protection
| +---x freeze
| +---x exercise
| +---x clear
+--rw xpic-pairs {xpic}?
| +--rw xpic-pair* [name]
| +--rw name string
| +--rw enabled? boolean
| +--rw members* if:interface-ref
+--rw mimo-groups {mimo}?
+--rw mimo-group* [name]
+--rw name string
+--rw enabled? boolean
+--rw members* if:interface-ref
augment /if:interfaces/if:interface:
+--rw id? string
+--rw mode identityref
+--rw carrier-terminations* if:interface-ref
+--rw rlp-groups*
| -> /radio-link-protection-groups/protection-group/name
+--rw xpic-pairs* -> /xpic-pairs/xpic-pair/name
| {xpic}?
+--rw mimo-groups* -> /mimo-groups/mimo-group/name
| {mimo}?
Ahlberg, et al. Standards Track [Page 5]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
+--rw tdm-connections* [tdm-type] {tdm}?
+--rw tdm-type identityref
+--rw tdm-connections uint16
augment /if:interfaces/if:interface:
+--rw carrier-id? string
+--rw tx-enabled? boolean
+--ro tx-oper-status? enumeration
+--rw tx-frequency uint32
+--rw (freq-or-distance)
| +--:(rx-frequency)
| | +--rw rx-frequency? uint32
| +--:(duplex-distance)
| +--rw duplex-distance? int32
+--ro actual-rx-frequency? uint32
+--ro actual-duplex-distance? uint32
+--rw channel-separation uint32
+--rw polarization? enumeration
+--rw (power-mode)
| +--:(rtpc)
| | +--rw rtpc
| | +--rw maximum-nominal-power power
| +--:(atpc)
| +--rw atpc
| +--rw maximum-nominal-power power
| +--rw atpc-lower-threshold power
| +--rw atpc-upper-threshold power
+--ro actual-transmitted-level? power
+--ro actual-received-level? power
+--rw (coding-modulation-mode)
| +--:(single)
| | +--rw single
| | +--rw selected-cm identityref
| +--:(adaptive)
| +--rw adaptive
| +--rw selected-min-acm identityref
| +--rw selected-max-acm identityref
+--ro actual-tx-cm? identityref
+--ro actual-snir? decimal64
+--ro actual-xpi? decimal64 {xpic}?
+--rw ct-performance-thresholds
| +--rw received-level-alarm-threshold? power
| +--rw transmitted-level-alarm-threshold? power
| +--rw ber-alarm-threshold? enumeration
+--rw if-loop? enumeration
+--rw rf-loop? enumeration
Ahlberg, et al. Standards Track [Page 6]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
+--ro capabilities
| +--ro min-tx-frequency? uint32
| +--ro max-tx-frequency? uint32
| +--ro min-rx-frequency? uint32
| +--ro max-rx-frequency? uint32
| +--ro minimum-power? power
| +--ro maximum-available-power? power
| +--ro available-min-acm? identityref
| +--ro available-max-acm? identityref
+--ro error-performance-statistics
| +--ro bbe? yang:counter32
| +--ro es? yang:counter32
| +--ro ses? yang:counter32
| +--ro uas? yang:counter32
+--ro radio-performance-statistics
+--ro min-rltm? power
+--ro max-rltm? power
+--ro min-tltm? power
+--ro max-tltm? power
2.2. Explanation of the Microwave Data Model
The leafs in the Interface Management Module augmented by RLT and CT
are not always applicable.
"/interfaces/interface/enabled" is not applicable for RLT. Enable
and disable of an interface is done in the constituent CTs.
The packet-related measurements "in-octets", "in-unicast-pkts",
"in-broadcast-pkts", "in-multicast-pkts", "in-discards", "in-errors",
"in-unknown-protos", "out-octets", "out-unicast-pkts", "out-
broadcast-pkts", "out-multicast-pkts", "out-discards", and "out-
errors" are not within the scope of the microwave radio link domain
and therefore are not applicable for RLT and CT.
3. Microwave Radio Link YANG Data Model
This module imports typedefs and modules from [RFC6991], [RFC8343]
and [RFC7224], and it references [TR102311], [EN302217-1],
[EN301129], and [G.826].
<CODE BEGINS> file "ietf-microwave-radio-link@2019-06-19.yang"
module ietf-microwave-radio-link {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-microwave-radio-link";
prefix mrl;
Ahlberg, et al. Standards Track [Page 7]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
import ietf-yang-types {
prefix yang;
reference
"RFC 6991";
}
import iana-if-type {
prefix ianaift;
}
import ietf-interfaces {
prefix if;
reference
"RFC 8343";
}
import ietf-interface-protection {
prefix ifprot;
reference
"RFC 8561";
}
import ietf-microwave-types {
prefix mw-types;
reference
"RFC 8561";
}
organization
"Internet Engineering Task Force (IETF) CCAMP WG";
contact
"WG List: <mailto:ccamp@ietf.org>
Editors:
Jonas Ahlberg (jonas.ahlberg@ericsson.com)
Min Ye (amy.yemin@huawei.com)
Xi Li (Xi.Li@neclab.eu)
Daniela Spreafico (daniela.spreafico@nokia.com)
Marko Vaupotic (Marko.Vaupotic@aviatnet.com)";
description
"This is a module for the entities in
a generic microwave system.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Ahlberg, et al. Standards Track [Page 8]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
This version of this YANG module is part of RFC 8561; see
the RFC itself for full legal notices.";
revision 2019-06-19 {
description
"Initial revision.";
reference
"RFC 8561: A YANG Data Model for Microwave Radio Link";
}
/*
* Features
*/
feature xpic {
description
"Indicates that the device supports XPIC.";
reference
"ETSI TR 102 311";
}
feature mimo {
description
"Indicates that the device supports MIMO.";
reference
"ETSI TR 102 311";
}
feature tdm {
description
"Indicates that the device supports TDM.";
}
/*
* Typedefs
*/
typedef power {
type decimal64 {
fraction-digits 1;
}
description
"Type used for the power values in the data nodes
for configuration or status.";
}
Ahlberg, et al. Standards Track [Page 9]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
/*
* Radio Link Terminal (RLT)
*/
augment "/if:interfaces/if:interface" {
when "derived-from-or-self(if:type,"
+ "'ianaift:microwaveRadioLinkTerminal')";
description
"Addition of data nodes for the radio link terminal to
the standard Interface data model, for interfaces of
the type 'microwaveRadioLinkTerminal'.";
leaf id {
type string;
description
"Descriptive identity of the radio link terminal used by
far-end RLT to check that it's connected to the correct
near-end RLT. Does not need to be configured if this
check is not used.";
}
leaf mode {
type identityref {
base mw-types:rlt-mode;
}
mandatory true;
description
"A description of the mode in which the radio link
terminal is configured. The format is X plus Y.
X represents the number of bonded carrier terminations.
Y represents the number of protecting carrier
terminations.";
}
leaf-list carrier-terminations {
type if:interface-ref;
must "derived-from-or-self(/if:interfaces/if:interface"
+ "[if:name = current()]"
+ "/if:type, 'ianaift:microwaveCarrierTermination')" {
description
"The type of interface must be
'microwaveCarrierTermination'.";
}
min-elements 1;
description
"A list of references to carrier terminations
included in the radio link terminal.";
}
Ahlberg, et al. Standards Track [Page 10]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
leaf-list rlp-groups {
type leafref {
path "/mrl:radio-link-protection-groups/"
+ "mrl:protection-group/mrl:name";
}
description
"A list of references to the carrier termination
groups configured for radio link protection in this
radio link terminal.";
}
leaf-list xpic-pairs {
if-feature "xpic";
type leafref {
path "/mrl:xpic-pairs/mrl:xpic-pair/mrl:name";
}
description
"A list of references to the XPIC pairs used in this
radio link terminal. One pair can be used by two
terminals.";
reference
"ETSI TR 102 311";
}
leaf-list mimo-groups {
if-feature "mimo";
type leafref {
path "/mrl:mimo-groups/mrl:mimo-group/mrl:name";
}
description
"A reference to the MIMO group used in this
radio link terminal. One group can be used by more
than one terminal.";
reference
"ETSI TR 102 311";
}
list tdm-connections {
if-feature "tdm";
key "tdm-type";
description
"A list stating the number of active TDM connections
of a specified tdm-type that is configured to be
supported by the RLT.";
leaf tdm-type {
type identityref {
base mw-types:tdm-type;
}
description
"The type of TDM connection, which also indicates
the supported capacity.";
Ahlberg, et al. Standards Track [Page 11]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
}
leaf tdm-connections {
type uint16;
mandatory true;
description
"Number of connections of the specified type.";
}
}
}
/*
* Carrier Termination
*/
augment "/if:interfaces/if:interface" {
when "derived-from-or-self(if:type,"
+ "'ianaift:microwaveCarrierTermination')";
description
"Addition of data nodes for carrier termination to
the standard Interface data model, for interfaces
of the type 'microwaveCarrierTermination'.";
leaf carrier-id {
type string;
default "A";
description
"ID of the carrier (e.g., A, B, C, or D).
Used in XPIC and MIMO configurations to check that
the carrier termination is connected to the correct
far-end carrier termination. Should be the same
carrier ID on both sides of the hop. Left as
default value when MIMO and XPIC are not in use.";
}
leaf tx-enabled {
type boolean;
default "false";
description
"Disables (false) or enables (true) the transmitter.
Only applicable when the interface is enabled
(interface:enabled = true); otherwise, it's always
disabled.";
}
leaf tx-oper-status {
type enumeration {
enum off {
description
"Transmitter is off.";
}
enum on {
Ahlberg, et al. Standards Track [Page 12]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"Transmitter is on.";
}
enum standby {
description
"Transmitter is in standby.";
}
}
config false;
description
"Shows the operative status of the transmitter.";
}
leaf tx-frequency {
type uint32;
units "kHz";
mandatory true;
description
"Selected transmitter frequency.";
}
choice freq-or-distance {
leaf rx-frequency {
type uint32;
units "kHz";
description
"Selected receiver frequency.";
}
leaf duplex-distance {
type int32;
units "kHz";
description
"Distance between transmitter and receiver frequencies.";
}
mandatory true;
description
"A choice to configure rx-frequency directly or compute
it as duplex-distance subtracted from tx-frequency.";
}
leaf actual-rx-frequency {
type uint32;
units "kHz";
config false;
description
"Computed receiver frequency.";
}
leaf actual-duplex-distance {
type uint32;
units "kHz";
config false;
Ahlberg, et al. Standards Track [Page 13]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"Computed distance between Tx and Rx frequencies.";
}
leaf channel-separation {
type uint32;
units "kHz";
mandatory true;
description
"The amount of bandwidth allocated to a carrier. The
distance between adjacent channels in a radio
frequency channels arrangement";
reference
"ETSI EN 302 217-1";
}
leaf polarization {
type enumeration {
enum horizontal {
description
"Horizontal polarization.";
}
enum vertical {
description
"Vertical polarization.";
}
enum not-specified {
description
"Polarization not specified.";
}
}
default "not-specified";
description
"Polarization - a textual description for info only.";
}
choice power-mode {
container rtpc {
description
"Remote Transmit Power Control (RTPC).";
reference
"ETSI EN 302 217-1";
leaf maximum-nominal-power {
type power {
range "-99..99";
}
units "dBm";
mandatory true;
description
"Selected output power.";
Ahlberg, et al. Standards Track [Page 14]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
reference
"ETSI EN 302 217-1";
}
}
container atpc {
description
"Automatic Transmitter Power Control (ATPC).";
reference
"ETSI EN 302 217-1";
leaf maximum-nominal-power {
type power {
range "-99..99";
}
units "dBm";
mandatory true;
description
"Selected maximum output power. Minimum output
power is the same as the system capability,
minimum-power.";
reference
"ETSI EN 302 217-1";
}
leaf atpc-lower-threshold {
type power {
range "-99..-20";
}
units "dBm";
must 'current() <= ../atpc-upper-threshold';
mandatory true;
description
"The lower threshold for the input power at the
far end, which is used in the ATPC mode.";
reference
"ETSI EN 302 217-1";
}
leaf atpc-upper-threshold {
type power {
range "-99..-20";
}
units "dBm";
mandatory true;
description
"The upper threshold for the input power at the
far end, which is used in the ATPC mode.";
reference
"ETSI EN 302 217-1";
}
}
Ahlberg, et al. Standards Track [Page 15]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
mandatory true;
description
"A choice of RTPC or ATPC.";
}
leaf actual-transmitted-level {
type power {
range "-99..99";
}
units "dBm";
config false;
description
"Actual transmitted power level (0.1 dBm resolution).";
reference
"ETSI EN 301 129";
}
leaf actual-received-level {
type power {
range "-99..-20";
}
units "dBm";
config false;
description
"Actual received power level (0.1 dBm resolution).";
reference
"ETSI EN 301 129";
}
choice coding-modulation-mode {
container single {
description
"A single modulation order only.";
reference
"ETSI EN 302 217-1";
leaf selected-cm {
type identityref {
base mw-types:coding-modulation;
}
mandatory true;
description
"Selected the single coding/modulation.";
}
}
container adaptive {
description
"Adaptive coding/modulation.";
reference
"ETSI EN 302 217-1";
Ahlberg, et al. Standards Track [Page 16]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
leaf selected-min-acm {
type identityref {
base mw-types:coding-modulation;
}
mandatory true;
description
"Selected minimum coding/modulation.
Adaptive coding/modulation shall not go
below this value.";
}
leaf selected-max-acm {
type identityref {
base mw-types:coding-modulation;
}
mandatory true;
description
"Selected maximum coding/modulation.
Adaptive coding/modulation shall not go
above this value.";
}
}
mandatory true;
description
"A selection of single or
adaptive coding/modulation mode.";
}
leaf actual-tx-cm {
type identityref {
base mw-types:coding-modulation;
}
config false;
description
"Actual coding/modulation in transmitting direction.";
}
leaf actual-snir {
type decimal64 {
fraction-digits 1;
range "0..99";
}
units "dB";
config false;
description
"Actual signal to noise plus the interference ratio
(0.1 dB resolution).";
}
leaf actual-xpi {
if-feature "xpic";
type decimal64 {
Ahlberg, et al. Standards Track [Page 17]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
fraction-digits 1;
range "0..99";
}
units "dB";
config false;
description
"The actual carrier to cross-polar interference.
Only valid if XPIC is enabled (0.1 dB resolution).";
reference
"ETSI TR 102 311";
}
container ct-performance-thresholds {
description
"Specification of thresholds for when alarms should
be sent and cleared for various performance counters.";
leaf received-level-alarm-threshold {
type power {
range "-99..-20";
}
units "dBm";
default "-99";
description
"An alarm is sent when the received power level is
below the specified threshold.";
reference
"ETSI EN 301 129";
}
leaf transmitted-level-alarm-threshold {
type power {
range "-99..99";
}
units "dBm";
default "-99";
description
"An alarm is sent when the transmitted power level
is below the specified threshold.";
reference
"ETSI EN 301 129";
}
leaf ber-alarm-threshold {
type enumeration {
enum 1e-9 {
description
"Threshold at 1e-9 (10^-9).";
}
enum 1e-8 {
description
"Threshold at 1e-8 (10^-8).";
Ahlberg, et al. Standards Track [Page 18]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
}
enum 1e-7 {
description
"Threshold at 1e-7 (10^-7).";
}
enum 1e-6 {
description
"Threshold at 1e-6 (10^-6).";
}
enum 1e-5 {
description
"Threshold at 1e-5 (10^-5).";
}
enum 1e-4 {
description
"Threshold at 1e-4 (10^-4).";
}
enum 1e-3 {
description
"Threshold at 1e-3 (10^-3).";
}
enum 1e-2 {
description
"Threshold at 1e-2 (10^-2).";
}
enum 1e-1 {
description
"Threshold at 1e-1 (10^-1).";
}
}
default "1e-6";
description
"Specification of at which BER an alarm should
be raised.";
reference
"ETSI EN 302 217-1";
}
}
leaf if-loop {
type enumeration {
enum disabled {
description
"Disables the IF Loop.";
}
enum client {
description
"Loops the signal back to the client side.";
}
Ahlberg, et al. Standards Track [Page 19]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
enum radio {
description
"Loops the signal back to the radio side.";
}
}
default "disabled";
description
"Enable (client/radio) or disable (disabled)
the IF Loop, which loops the signal back to
the client side or the radio side.";
}
leaf rf-loop {
type enumeration {
enum disabled {
description
"Disables the RF Loop.";
}
enum client {
description
"Loops the signal back to the client side.";
}
enum radio {
description
"Loops the signal back to the radio side.";
}
}
default "disabled";
description
"Enable (client/radio) or disable (disabled)
the RF loop, which loops the signal back to
the client side or the radio side.";
}
container capabilities {
config false;
description
"Capabilities of the installed equipment and
some selected configurations.";
leaf min-tx-frequency {
type uint32;
units "kHz";
description
"Minimum Tx frequency possible to use.";
}
leaf max-tx-frequency {
type uint32;
units "kHz";
description
"Maximum Tx frequency possible to use.";
Ahlberg, et al. Standards Track [Page 20]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
}
leaf min-rx-frequency {
type uint32;
units "kHz";
description
"Minimum Rx frequency possible to use.";
}
leaf max-rx-frequency {
type uint32;
units "kHz";
description
"Maximum Tx frequency possible to use.";
}
leaf minimum-power {
type power;
units "dBm";
description
"The minimum output power supported.";
reference
"ETSI EN 302 217-1";
}
leaf maximum-available-power {
type power;
units "dBm";
description
"The maximum output power supported.";
reference
"ETSI EN 302 217-1";
}
leaf available-min-acm {
type identityref {
base mw-types:coding-modulation;
}
description
"Minimum coding-modulation possible to use.";
}
leaf available-max-acm {
type identityref {
base mw-types:coding-modulation;
}
description
"Maximum coding-modulation possible to use.";
}
}
container error-performance-statistics {
config false;
Ahlberg, et al. Standards Track [Page 21]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"ITU-T G.826 error performance statistics relevant for
a microwave/millimeter wave carrier.";
leaf bbe {
type yang:counter32;
units "number of block errors";
description
"Number of Background Block Errors (BBEs). A BBE is an
errored block not occurring as part of Severely Errored
Seconds (SES). Discontinuities in the value of this
counter can occur at re-initialization of the management
system and at other times as indicated by the value of
'discontinuity-time' in ietf-interfaces.";
reference
"ITU-T G.826";
}
leaf es {
type yang:counter32;
units "seconds";
description
"Number of Errored Seconds (ES). An ES is a one-second
period with one or more errored blocks or at least one
defect. Discontinuities in the value of this counter
can occur at re-initialization of the management system
and at other times as indicated by the value of
'discontinuity-time' in ietf-interfaces.";
reference
"ITU-T G.826";
}
leaf ses {
type yang:counter32;
units "seconds";
description
"Number of SES. SES is a one-second period that contains
equal or more than 30% errored blocks or at least
one defect. SES is a subset of ES. Discontinuities in
the value of this counter can occur at re-initialization
of the management system and at other times as indicated
by the value of 'discontinuity-time' in ietf-interfaces.";
reference
"ITU-T G.826";
}
leaf uas {
type yang:counter32;
units "seconds";
description
"Number of Unavailable Seconds (UAS); that is, the
total time that the node has been unavailable.
Ahlberg, et al. Standards Track [Page 22]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Discontinuities in the value of this counter can occur
at re-initialization of the management system and at
other times as indicated by the value of
'discontinuity-time' in ietf-interfaces.";
reference
"ITU-T G.826";
}
}
container radio-performance-statistics {
config false;
description
"ETSI EN 301 129 radio physical interface statistics relevant
for a carrier termination.";
leaf min-rltm {
type power {
range "-99..-20";
}
units "dBm";
description
"Minimum received power level. Discontinuities in the
value of this counter can occur at re-initialization
of the management system and at other times as
indicated by the value of 'discontinuity-time' in
ietf-interfaces.";
reference
"ETSI EN 301 129";
}
leaf max-rltm {
type power {
range "-99..-20";
}
units "dBm";
description
"Maximum received power level. Discontinuities in the
value of this counter can occur at re-initialization
of the management system and at other times as
indicated by the value of 'discontinuity-time' in
ietf-interfaces.";
reference
"ETSI EN 301 129";
}
leaf min-tltm {
type power {
range "-99..99";
}
units "dBm";
Ahlberg, et al. Standards Track [Page 23]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"Minimum transmitted power level. Discontinuities
in the value of this counter can occur at
re-initialization of the management system and
at other times as indicated by the value of
'discontinuity-time' in ietf-interfaces.";
reference
"ETSI EN 301 129";
}
leaf max-tltm {
type power {
range "-99..99";
}
units "dBm";
description
"Maximum transmitted power level. Discontinuities
in the value of this counter can occur at
re-initialization of the management system and
at other times as indicated by the value of
'discontinuity-time' in ietf-interfaces.";
reference
"ETSI EN 301 129";
}
}
}
/*
* Radio Link Protection Groups
*/
container radio-link-protection-groups {
description
"Configuration of radio link protected groups of
carrier terminations in a radio link. More than one
protected group per radio link terminal is allowed.";
uses ifprot:protection-groups {
refine "protection-group/members" {
must "derived-from-or-self(/if:interfaces/if:interface"
+ "[if:name = current()]"
+ "/if:type, 'ianaift:microwaveCarrierTermination')" {
description
"The type of a protection member must be
'microwaveCarrierTermination'.";
}
}
refine "protection-group/working-entity" {
must "derived-from-or-self(/if:interfaces/if:interface"
+ "[if:name = current()]"
Ahlberg, et al. Standards Track [Page 24]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
+ "/if:type, 'ianaift:microwaveCarrierTermination')" {
description
"The type of a working-entity must be
'microwaveCarrierTermination'.";
}
}
}
}
/*
* XPIC & MIMO groups - Configuration data nodes
*/
container xpic-pairs {
if-feature "xpic";
description
"Configuration of carrier termination pairs
for operation in XPIC mode.";
reference
"ETSI TR 102 311";
list xpic-pair {
key "name";
description
"List of carrier termination pairs in XPIC mode.";
leaf name {
type string;
description
"Name used for identification of the XPIC pair.";
}
leaf enabled {
type boolean;
default "false";
description
"Enable(true)/disable(false) XPIC";
}
leaf-list members {
type if:interface-ref;
must "derived-from-or-self(/if:interfaces/if:interface"
+ "[if:name = current()]"
+ "/if:type, 'ianaift:microwaveCarrierTermination')" {
description
"The type of a member must be
'microwaveCarrierTermination'.";
}
min-elements 2;
max-elements 2;
Ahlberg, et al. Standards Track [Page 25]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"Association to XPIC pairs used in the radio link
terminal.";
}
}
}
container mimo-groups {
if-feature "mimo";
description
"Configuration of carrier terminations
for operation in MIMO mode.";
reference
"ETSI TR 102 311";
list mimo-group {
key "name";
description
"List of carrier terminations in MIMO mode.";
leaf name {
type string;
description
"Name used for identification of the MIMO group.";
}
leaf enabled {
type boolean;
default "false";
description
"Enable(true)/disable(false) MIMO.";
}
leaf-list members {
type if:interface-ref;
must "derived-from-or-self(/if:interfaces/if:interface"
+ "[if:name = current()]"
+ "/if:type, 'ianaift:microwaveCarrierTermination')" {
description
"The type of a member must be
'microwaveCarrierTermination'.";
}
min-elements 2;
description
"Association to a MIMO group if used in the radio
link terminal.";
}
}
}
}
<CODE ENDS>
Ahlberg, et al. Standards Track [Page 26]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
4. Interface Protection YANG Data Model
The data nodes for management of the interface protection
functionality is broken out from the Microwave Radio Link Module into
a separate and generic YANG data model in order to make it also
available for other interface types.
This module imports modules from [RFC8343], and it references
[G.808.1].
<CODE BEGINS> file "ietf-interface-protection@2019-06-19.yang"
module ietf-interface-protection {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-interface-protection";
prefix ifprot;
import ietf-interfaces {
prefix if;
reference
"RFC 8343";
}
organization
"Internet Engineering Task Force (IETF) CCAMP WG";
contact
"WG List: <mailto:ccamp@ietf.org>
Editors:
Jonas Ahlberg (jonas.ahlberg@ericsson.com)
Min Ye (amy.yemin@huawei.com)
Xi Li (Xi.Li@neclab.eu)
Daniela Spreafico (daniela.spreafico@nokia.com)
Marko Vaupotic (Marko.Vaupotic@aviatnet.com)";
description
"This is a module for the entities in
a generic interface protection mechanism.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Ahlberg, et al. Standards Track [Page 27]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
This version of this YANG module is part of RFC 8561; see
the RFC itself for full legal notices.";
revision 2019-06-19 {
description
"Initial revision.";
reference
"RFC 8561: A YANG Data Model for Microwave Radio Link";
}
/*
* Protection architecture type identities
*/
identity protection-architecture-type {
description
"protection architecture type";
reference
"ITU-T G.808.1";
}
identity one-plus-one-type {
base protection-architecture-type;
description
"1+1; one interface protects
another one interface.";
reference
"ITU-T G.808.1";
}
identity one-to-n-type {
base protection-architecture-type;
description
"1:N; one interface protects
n other interfaces.";
reference
"ITU-T G.808.1";
}
/*
* Protection states identities
*/
identity protection-states {
description
"Identities describing the status of the protection
in a group of interfaces configured in
a protection mode.";
Ahlberg, et al. Standards Track [Page 28]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
}
identity unprotected {
base protection-states;
description
"Not protected.";
}
identity protected {
base protection-states;
description
"Protected.";
}
identity unable-to-protect {
base protection-states;
description
"Unable to protect.";
}
/*
* Protection Groups
*/
grouping protection-groups {
description
"Configuration of protected groups of interfaces
providing protection for each other. More than one
protected group per higher-layer interface is allowed.";
list protection-group {
key "name";
description
"List of protected groups of interfaces
in a higher-layer interface.";
leaf name {
type string;
description
"Name used for identification of the protection group.";
}
leaf protection-architecture-type {
type identityref {
base protection-architecture-type;
}
default "ifprot:one-plus-one-type";
description
"The type of protection architecture used, e.g., one
interface protecting one or several other interfaces.";
Ahlberg, et al. Standards Track [Page 29]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
reference
"ITU-T G.808.1";
}
leaf-list members {
type if:interface-ref;
min-elements 2;
description
"Association to a group of interfaces configured for
protection and used by a higher-layer interface.";
}
leaf operation-type {
type enumeration {
enum non-revertive {
description
"In non-revertive operation, the traffic does not
return to the working interface if the switch requests
are terminated.";
reference
"ITU-T G.808.1";
}
enum revertive {
description
"In revertive operation, the traffic always
returns to (or remains on) the working interface
if the switch requests are terminated.";
reference
"ITU-T G.808.1";
}
}
default "non-revertive";
description
"The type of protection operation, i.e., revertive
or non-revertive operation.";
}
leaf-list working-entity {
when "../operation-type = 'revertive'";
type if:interface-ref;
min-elements 1;
description
"The interfaces that the traffic normally should
be transported over when there is no need to use the
protecting interface.";
}
leaf revertive-wait-to-restore {
when "../operation-type = 'revertive'";
type uint16;
units "seconds";
default "0";
Ahlberg, et al. Standards Track [Page 30]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
description
"The time to wait before switching back to the working
interface if operation-type is revertive.";
reference
"ITU-T G.808.1";
}
leaf hold-off-timer {
type uint16;
units "milliseconds";
default "0";
description
"Time interval after the detection of a fault and its
confirmation as a condition requiring the protection-
switching procedure.";
reference
"ITU-T G.808.1";
}
leaf status {
type identityref {
base protection-states;
}
config false;
description
"Status of the protection in a group of interfaces
configured in a protection mode.";
reference
"ITU-T G.808.1";
}
action manual-switch-working {
description
"A switch action initiated by an operator command.
It switches a normal traffic signal to the working
transport entity.";
reference
"ITU-T G.808.1";
}
action manual-switch-protection {
description
"A switch action initiated by an operator command.
It switches a normal traffic signal to the protection
transport entity.";
reference
"ITU-T G.808.1";
}
action forced-switch {
description
"A switch action initiated by an operator command.
It switches a normal traffic signal to the protection
Ahlberg, et al. Standards Track [Page 31]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
transport entity and forces it to remain on that
entity even when criteria for switching back to
the original entity are fulfilled.";
reference
"ITU-T G.808.1";
}
action lockout-of-protection {
description
"A switch action temporarily disables access to the
protection transport entity for all signals.";
reference
"ITU-T G.808.1";
}
action freeze {
description
"A switch action temporarily prevents any switch action
to be taken and, as such, freezes the current state.
Until the freeze is cleared, additional near-end external
commands are rejected, and fault condition changes and
received Automatic Protection-Switching (APS) messages
are ignored.";
reference
"ITU-T G.808.1";
}
action exercise {
description
"A switch action to test if the APS communication is
operating correctly. It is lower priority than any 'real'
switch request.";
reference
"ITU-T G.808.1";
}
action clear {
description
"An action clears all switch commands.";
reference
"ITU-T G.808.1";
}
}
}
}
<CODE ENDS>
Ahlberg, et al. Standards Track [Page 32]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
5. Microwave Types YANG Data Model
This module defines a collection of common data types using the YANG
data modeling language. These common types are designed to be
imported by other modules defined in the microwave area.
<CODE BEGINS> file "ietf-microwave-types@2019-06-19.yang"
module ietf-microwave-types {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-microwave-types";
prefix mw-types;
organization
"Internet Engineering Task Force (IETF) CCAMP WG";
contact
"WG List: <mailto:ccamp@ietf.org>
Editors:
Jonas Ahlberg (jonas.ahlberg@ericsson.com)
Min Ye (amy.yemin@huawei.com)
Xi Li (Xi.Li@neclab.eu)
Daniela Spreafico (daniela.spreafico@nokia.com)
Marko Vaupotic (Marko.Vaupotic@aviatnet.com)";
description
"This module contains a collection of YANG data types
considered generally useful for microwave interfaces.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 8561; see
the RFC itself for full legal notices.";
revision 2019-06-19 {
description
"Initial revision.";
reference
"RFC 8561: A YANG Data Model for Microwave Radio Link";
}
Ahlberg, et al. Standards Track [Page 33]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
/*
* Radio-link-terminal mode identities
*/
identity rlt-mode {
description
"A description of the mode in which the radio link
terminal is configured. The format is X plus Y.
X represents the number of bonded carrier terminations.
Y represents the number of protecting carrier
terminations.";
}
identity one-plus-zero {
base rlt-mode;
description
"1 carrier termination only.";
}
identity one-plus-one {
base rlt-mode;
description
"1 carrier termination
and 1 protecting carrier termination.";
}
identity two-plus-zero {
base rlt-mode;
description
"2 bonded carrier terminations.";
}
/*
* Coding and modulation identities
*/
identity coding-modulation {
description
"The coding and modulation schemes.";
}
identity half-bpsk {
base coding-modulation;
description
"Half BPSK coding and modulation scheme.";
}
Ahlberg, et al. Standards Track [Page 34]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
identity half-bpsk-strong {
base half-bpsk;
description
"Half BPSK strong coding and modulation scheme.";
}
identity half-bpsk-light {
base half-bpsk;
description
"Half BPSK light coding and modulation scheme.";
}
identity bpsk {
base coding-modulation;
description
"BPSK coding and modulation scheme.";
}
identity bpsk-strong {
base bpsk;
description
"BPSK strong coding and modulation scheme.";
}
identity bpsk-light {
base bpsk;
description
"BPSK light coding and modulation scheme.";
}
identity qpsk {
base coding-modulation;
description
"QPSK coding and modulation scheme.";
}
identity qam-4 {
base coding-modulation;
description
"4 QAM coding and modulation scheme.";
}
identity qam-4-strong {
base qam-4;
description
"4 QAM strong coding and modulation scheme.";
}
Ahlberg, et al. Standards Track [Page 35]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
identity qam-4-light {
base qam-4;
description
"4 QAM light coding and modulation scheme.";
}
identity qam-16 {
base coding-modulation;
description
"16 QAM coding and modulation scheme.";
}
identity qam-16-strong {
base qam-16;
description
"16 QAM strong coding and modulation scheme.";
}
identity qam-16-light {
base qam-16;
description
"16 QAM light coding and modulation scheme.";
}
identity qam-32 {
base coding-modulation;
description
"32 QAM coding and modulation scheme.";
}
identity qam-32-strong {
base qam-32;
description
"32 QAM strong coding and modulation scheme.";
}
identity qam-32-light {
base qam-32;
description
"32 QAM light coding and modulation scheme.";
}
identity qam-64 {
base coding-modulation;
description
"64 QAM coding and modulation scheme.";
}
Ahlberg, et al. Standards Track [Page 36]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
identity qam-64-strong {
base qam-64;
description
"64 QAM strong coding and modulation scheme.";
}
identity qam-64-light {
base qam-64;
description
"64 QAM light coding and modulation scheme.";
}
identity qam-128 {
base coding-modulation;
description
"128 QAM coding and modulation scheme.";
}
identity qam-128-strong {
base qam-128;
description
"128 QAM strong coding and modulation scheme.";
}
identity qam-128-light {
base qam-128;
description
"128 QAM light coding and modulation scheme.";
}
identity qam-256 {
base coding-modulation;
description
"256 QAM coding and modulation scheme.";
}
identity qam-256-strong {
base qam-256;
description
"256 QAM strong coding and modulation scheme.";
}
identity qam-256-light {
base qam-256;
description
"256 QAM light coding and modulation scheme.";
}
Ahlberg, et al. Standards Track [Page 37]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
identity qam-512 {
base coding-modulation;
description
"512 QAM coding and modulation scheme.";
}
identity qam-512-strong {
base qam-512;
description
"512 QAM strong coding and modulation scheme.";
}
identity qam-512-light {
base qam-512;
description
"512 QAM light coding and modulation scheme.";
}
identity qam-1024 {
base coding-modulation;
description
"1024 QAM coding and modulation scheme.";
}
identity qam-1024-strong {
base qam-1024;
description
"1024 QAM strong coding and modulation scheme.";
}
identity qam-1024-light {
base qam-1024;
description
"1024 QAM light coding and modulation scheme.";
}
identity qam-2048 {
base coding-modulation;
description
"2048 QAM coding and modulation scheme.";
}
identity qam-2048-strong {
base qam-2048;
description
"2048 QAM strong coding and modulation scheme.";
}
Ahlberg, et al. Standards Track [Page 38]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
identity qam-2048-light {
base qam-2048;
description
"2048 QAM light coding and modulation scheme.";
}
identity qam-4096 {
base coding-modulation;
description
"4096 QAM coding and modulation scheme.";
}
identity qam-4096-strong {
base qam-4096;
description
"4096 QAM strong coding and modulation scheme.";
}
identity qam-4096-light {
base qam-4096;
description
"4096 QAM light coding and modulation scheme.";
}
/*
* TDM-type identities
*/
identity tdm-type {
description
"A description of the type of TDM connection,
also indicating the supported capacity of the
connection.";
}
identity E1 {
base tdm-type;
description
"E1 connection, 2.048 Mbit/s.";
}
identity STM-1 {
base tdm-type;
description
"STM-1 connection, 155.52 Mbit/s.";
}
}
Ahlberg, et al. Standards Track [Page 39]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
<CODE ENDS>
6. Security Considerations
The YANG data models specified in this document define schemas for
data that is designed to be accessed via network management protocols
such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF
layer is the secure transport layer, and the mandatory-to-implement
secure transport is Secure Shell (SSH) [RFC6242]. The lowest
RESTCONF layer is HTTPS, and the mandatory-to-implement secure
transport is TLS [RFC8446].
The Network Configuration Access Control Model (NACM) [RFC8341]
provides the means to restrict access for particular NETCONF or
RESTCONF users to a preconfigured subset of all available NETCONF or
RESTCONF protocol operations and content.
There are a number of data nodes defined in these YANG data models
that are writable/creatable/deletable (i.e., config true, which is
the default). These data nodes may be considered sensitive or
vulnerable in some network environments. Write operations (e.g.,
edit-config) to these data nodes without proper protection can have a
negative effect on network operations. These are the subtrees and
data nodes and their sensitivity/vulnerability:
Interfaces of type microwaveRadioLinkTerminal:
/if:interfaces/if:interface/mode,
/if:interfaces/if:interface/carrier-terminations,
/if:interfaces/if:interface/rlp-groups,
/if:interfaces/if:interface/xpic-pairs,
/if:interfaces/if:interface/mimo-groups, and
/if:interfaces/if:interface/tdm-connections:
These data nodes represent the configuration of the radio link
terminal, and they need to match the configuration of the radio link
terminal on the other side of the radio link. Unauthorized access to
these data nodes could interrupt the ability to forward traffic.
Interfaces of type microwaveCarrierTermination:
/if:interfaces/if:interface/carrier-id,
/if:interfaces/if:interface/tx-enabled,
/if:interfaces/if:interface/tx-frequency,
/if:interfaces/if:interface/rx-frequency,
/if:interfaces/if:interface/duplex-distance,
/if:interfaces/if:interface/channel-separation,
/if:interfaces/if:interface/rtpc/maximum-nominal-power,
Ahlberg, et al. Standards Track [Page 40]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
/if:interfaces/if:interface/atpc/maximum-nominal-power,
/if:interfaces/if:interface/atpc/atpc-lower-threshold,
/if:interfaces/if:interface/atpc/atpc-upper-threshold,
/if:interfaces/if:interface/single/selected-cm,
/if:interfaces/if:interface/adaptive/selected-min-acm,
/if:interfaces/if:interface/adaptive/selected-max-acm,
/if:interfaces/if:interface/if-loop, and
/if:interfaces/if:interface/rf-loop:
These data nodes represent the configuration of the carrier
termination, and they need to match the configuration of the carrier
termination on the other side of the carrier. Unauthorized access to
these data nodes could interrupt the ability to forward traffic.
Radio link protection:
/radio-link-protection-groups/protection-group:
This data node represents the configuration of the protection of
carrier terminations. Unauthorized access to this data node could
interrupt the ability to forward traffic or remove the ability to
perform a necessary protection switch.
XPIC:
/xpic-pairs:
This data node represents the XPIC configuration of a pair of
carriers. Unauthorized access to this data node could interrupt the
ability to forward traffic.
MIMO:
/mimo-groups:
This data node represents the MIMO configuration of multiple
carriers. Unauthorized access to this data node could interrupt the
ability to forward traffic.
Some of the RPC operations in this YANG data model may be considered
sensitive or vulnerable in some network environments. It is thus
important to control access to these operations. These are the
operations and their sensitivity/vulnerability:
Ahlberg, et al. Standards Track [Page 41]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Radio link protection:
/radio-link-protection-groups/protection-group/manual-switch-working,
/radio-link-protection-groups/protection-group/
manual-switch-protection,
/radio-link-protection-groups/protection-group/forced-switch,
/radio-link-protection-groups/protection-group/lockout-of-protection,
/radio-link-protection-groups/protection-group/freeze,
/radio-link-protection-groups/protection-group/exercise, and
/radio-link-protection-groups/protection-group/clear
These data nodes represent actions that might have an impact on the
configuration of the protection of carrier terminations.
Unauthorized access to these data nodes could interrupt the ability
to forward traffic or remove the ability to perform a necessary
protection switch.
The security considerations of [RFC8343] also apply to this document.
7. IANA Considerations
IANA has assigned new URIs from the "IETF XML Registry" [RFC3688] as
follows:
URI: urn:ietf:params:xml:ns:yang:ietf-microwave-radio-link
Registrant Contact: The IESG
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-interface-protection
Registrant Contact: The IESG
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-microwave-types
Registrant Contact: The IESG
XML: N/A; the requested URI is an XML namespace.
Ahlberg, et al. Standards Track [Page 42]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
IANA has recorded YANG module names in the "YANG Module Names"
registry [RFC6020] as follows:
Name: ietf-microwave-radio-link
Maintained by IANA?: N
Namespace: urn:ietf:params:xml:ns:yang:ietf-microwave-radio-link
Prefix: mrl
Reference: RFC 8561
Name: ietf-interface-protection
Maintained by IANA?: N
Namespace: urn:ietf:params:xml:ns:yang:ietf-interface-protection
Prefix: ifprot
Reference: RFC 8561
Name: ietf-microwave-types
Maintained by IANA?: N
Namespace: urn:ietf:params:xml:ns:yang:ietf-microwave-types
Prefix: mw-types
Reference: RFC 8561
IANA has registered the following ifTypes in "ifType definitions"
under [IANA-SMI]:
Decimal Name Description
------- ------------ -------------------------------
295 microwaveCarrierTermination air interface of a single
microwave carrier
296 microwaveRadioLinkTerminal radio link interface for one
or several aggregated microwave
carriers
8. References
8.1. Normative References
[IANA-SMI] IANA, "Structure of Management Information (SMI) Numbers
(MIB Module Registrations)",
<https://www.iana.org/assignments/smi-numbers>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
Ahlberg, et al. Standards Track [Page 43]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/info/rfc6020>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/info/rfc6991>.
[RFC7224] Bjorklund, M., "IANA Interface Type YANG Module",
RFC 7224, DOI 10.17487/RFC7224, May 2014,
<https://www.rfc-editor.org/info/rfc7224>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/info/rfc8341>.
[RFC8343] Bjorklund, M., "A YANG Data Model for Interface
Management", RFC 8343, DOI 10.17487/RFC8343, March 2018,
<https://www.rfc-editor.org/info/rfc8343>.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
<https://www.rfc-editor.org/info/rfc8446>.
8.2. Informative References
[EN301129] ETSI, "Transmission and Multiplexing (TM); Digital Radio
Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH);
System performance monitoring parameters of SDH DRRS", EN
301 129 V1.1.2, May 1999.
Ahlberg, et al. Standards Track [Page 44]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
[EN302217-1]
ETSI, "Fixed Radio Systems; Characteristics and
requirements for point-to-point equipment and antennas;
Part 1: Overview, common characteristics and system-
dependent requirements", EN 302 217-1 V3.1.0, May 2017.
[EN302217-2]
ETSI, "Fixed Radio Systems; Characteristics and
requirements for point to-point equipment and antennas;
Part 2: Digital systems operating in frequency bands from
1 GHz to 86 GHz; Harmonised Standard covering the
essential requirements of article 3.2 of Directive
2014/53/EU", EN 302 217-2 V3.1.1, May 2017.
[G.808.1] ITU-T, "SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL
SYSTEMS AND NETWORKS; Digital networks ; General aspects
Generic protection switching ; Linear trail and subnetwork
protection", ITU-T Recommendation G.808.1, May 2014.
[G.826] ITU-T, "SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL
SYSTEMS AND NETWORKS; Digital networks - Quality and
availability targets; End-to-end error performance
parameters and objectives for international, constant bit-
rate digital paths and connections", ITU-T
Recommendation G.826, December 2002.
[MICROWAVE-RADIO-LINK]
Ahlberg, J., Carlson, J., Lund, H., Olausson, T., Ye, M.,
and M. Vaupotic, "Microwave Radio Link YANG Data Models",
Work in Progress, draft-ahlberg-ccamp-microwave-radio-
link-01, May 2016.
[ONF-model]
ONF, "Microwave Information Model", TR-532, version 1.0,
December 2016,
<https://www.opennetworking.org/images/stories/downloads/
sdn-resources/technical-reports/
TR-532-Microwave-Information-Model-V1.pdf>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>.
[RFC8342] Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
and R. Wilton, "Network Management Datastore Architecture
(NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
<https://www.rfc-editor.org/info/rfc8342>.
Ahlberg, et al. Standards Track [Page 45]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
[RFC8432] Ahlberg, J., Ed., Ye, M., Ed., Li, X., Contreras, LM., and
CJ. Bernardos, "A Framework for Management and Control of
Microwave and Millimeter Wave Interface Parameters",
RFC 8432, DOI 10.17487/RFC8432, October 2018,
<https://www.rfc-editor.org/info/rfc8432>.
[TR102311] ETSI, "Fixed Radio Systems; Point-to-point equipment;
Specific aspects of the spatial frequency reuse method",
ETSI TR 102 311 V1.2.1, November 2015.
Ahlberg, et al. Standards Track [Page 46]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Appendix A. Example: 1+0 and 2+0 Configuration Instances
This section gives simple examples of 1+0 and 2+0 instances using the
YANG data model defined in this document. The examples are not
intended as a complete module for 1+0 and 2+0 configuration.
A.1. 1+0 Instance
/--------- Radio Link ---------\
Near End Far End
+---------------+ +---------------+
| Radio Link | | Radio Link |
| Terminal A | | Terminal B |
| | | |
| | | |
| +-----------+ | | +-----------+ |
| | | | Carrier A | | | |
| | Carrier | |<--------->| | Carrier | |
| |Termination| | | |Termination| |
| | 1 | | | | 1 | |
| +-----------+ | | +-----------+ |
| | | |
| | | |
+---------------+ +---------------+
\--- Microwave Node ---/ \--- Microwave Node ---/
Figure 1: 1+0 Example
Figure 1 shows a 1+0 example. The following instance shows the 1+0
configuration of the Near End node.
Ahlberg, et al. Standards Track [Page 47]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
"interface": [
{
"name": "RLT-A",
"description": "Radio Link Terminal A",
"type": "microwaveRadioLinkTerminal",
"id": "RLT-A",
"mode": "one-plus-zero",
"carrier-terminations": [
"RLT-A:CT-1"
],
"tdm-connections": [
"tdm-type": "E1",
"tdm-connections": "4"
]
},
{
"name": "RLT-A:CT-1",
"description": "Carrier Termination 1",
"type": "microwaveCarrierTermination",
"carrier-id": "A",
"tx-enabled": true,
"tx-frequency": 10728000,
"duplex-distance": 644000,
"channel-separation": 28000,
"polarization": not-specified,
"rtpc": {
"maximum-nominal-power": 20
},
"single": {
"selected-cm": "qam-512"
}
}
]
Ahlberg, et al. Standards Track [Page 48]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
A.2. 2+0 Instance
Figure 2 shows a 2+0 example.
/--------- Radio Link ---------\
Near End Far End
+---------------+ +---------------+
| Radio Link | | Radio Link |
| Terminal A | | Terminal B |
| | | |
| | | |
| +-----------+ | | +-----------+ |
| | | | Carrier A | | | |
| | Carrier | |<--------->| | Carrier | |
| |Termination| | | |Termination| |
| | 1 | | | | 1 | |
| +-----------+ | | +-----------+ |
| | | |
| +-----------+ | | +-----------+ |
| | | | Carrier B | | | |
| | Carrier | |<--------->| | Carrier | |
| |Termination| | | |Termination| |
| | 2 | | | | 2 | |
| +-----------+ | | +-----------+ |
| | | |
+---------------+ +---------------+
\--- Microwave Node ---/ \--- Microwave Node ---/
Figure 2: 2+0 Example
The following instance shows the 2+0 configuration of the Near End
node.
"interface": [
{
"name": "RLT-A",
"description": "Radio Link Terminal A",
"type": "microwaveRadioLinkTerminal",
"id": "RLT-A",
"mode": "two-plus-zero",
"carrier-terminations": [
"RLT-A:CT-1",
"RLT-A:CT-2"
],
Ahlberg, et al. Standards Track [Page 49]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
"tdm-connections": [
"tdm-type": "E1",
"tdm-connections": "4"
]
},
{
"name": "RLT-A:CT-1",
"description": "Carrier Termination 1",
"type": "microwaveCarrierTermination",
"carrier-id": "A",
"tx-enabled": true,
"tx-frequency": 10728000,
"duplex-distance": 644000,
"channel-separation": 28000,
"polarization": not-specified,
"rtpc": {
"maximum-nominal-power": 20
},
"single": {
"selected-cm": "qam-512"
}
},
{
"name": "RLT-A:CT-2",
"description": "Carrier Termination 2",
"type": "microwaveCarrierTermination",
"carrier-id": "B",
"tx-enabled": true,
"tx-oper-status": on,
"tx-frequency": 10618000,
"duplex-distance": 644000,
"channel-separation": 28000,
"polarization": not-specified,
"rtpc": {
"maximum-nominal-power": 20
},
"single": {
"selected-cm": "qam-512"
}
}
]
Ahlberg, et al. Standards Track [Page 50]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
A.3. 2+0 XPIC Instance
The following instance shows the XPIC configuration of the Near End
node.
"interface": [
{
"name": "RLT-A",
"description": "Radio Link Terminal A",
"type": "microwaveRadioLinkTerminal",
"id": "RLT-A",
"mode": "two-plus-zero",
"carrier-terminations": [
"RLT-A:CT-1",
"RLT-A:CT-2"
],
"xpic-pairs": [
"RLT-A:CT-1",
"RLT-A:CT-2"
],
"tdm-connections": [
"tdm-type": "E1",
"tdm-connections": "4"
]
},
{
"name": "RLT-A:CT-1",
"description": "Carrier Termination 1",
"type": "microwaveCarrierTermination",
"carrier-id": "A",
"tx-enabled": true,
"tx-frequency": 10728000,
"duplex-distance": 644000,
"channel-separation": 28000,
"polarization": not-specified,
"rtpc": {
"maximum-nominal-power": 20
},
"single": {
"selected-cm": "qam-512"
}
},
Ahlberg, et al. Standards Track [Page 51]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
{
"name": "RLT-A:CT-2",
"description": "Carrier Termination 2",
"type": "microwaveCarrierTermination",
"carrier-id": "B",
"tx-enabled": true,
"tx-oper-status": on,
"tx-frequency": 10618000,
"duplex-distance": 644000,
"channel-separation": 28000,
"polarization": not-specified,
"rtpc": {
"maximum-nominal-power": 20
},
"single": {
"selected-cm": "qam-512"
}
}
]
Contributors
Koji Kawada
NEC Corporation
1753, Shimonumabe Nakahara-ku
Kawasaki, Kanagawa 211-8666
Japan
Email: k-kawada@ah.jp.nec.com
Carlos J. Bernardos
Universidad Carlos III de Madrid
Av. Universidad, 30
Leganes, Madrid 28911
Spain
Email: cjbc@it.uc3m.es
Ahlberg, et al. Standards Track [Page 52]
RFC 8561 Microwave Radio Link YANG Data Model June 2019
Authors' Addresses
Jonas Ahlberg
Ericsson AB
Lindholmspiren 11
Goteborg 417 56
Sweden
Email: jonas.ahlberg@ericsson.com
Min Ye
Huawei Technologies
No.1899, Xiyuan Avenue
Chengdu 611731
China
Email: amy.yemin@huawei.com
Xi Li
NEC Laboratories Europe
Kurfursten-Anlage 36
Heidelberg 69115
Germany
Email: Xi.Li@neclab.eu
Daniela Spreafico
Nokia - IT
Via Energy Park, 14
Vimercate (MI) 20871
Italy
Email: daniela.spreafico@nokia.com
Marko Vaupotic
Aviat Networks
Motnica 9
Trzin-Ljubljana 1236
Slovenia
Email: Marko.Vaupotic@Aviatnet.com
Ahlberg, et al. Standards Track [Page 53]